文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 冶金/矿山/地质 > 高强度硼钢热成形技术研究及其应用
侵权投诉

高强度硼钢热成形技术研究及其应用

第46卷第14期

机 械 工 程 学 报

JOURNAL OF MECHANICAL ENGINEERING

Vol.46 No.14 Jul. 2010

2010年7月

DOI:10.3901/JME.2010.14.068

高强度硼钢热成形技术研究及其应用*

马 宁1, 2 胡 平1, 2 闫康康3 郭 威4 孟祥兵5 翟述基5

(1. 大连理工大学工业装备结构分析国家重点实验室 大连 116024;

2. 大连理工大学汽车工程学院 大连 116024;3. 吉林大学汽车工程学院 长春 130025;

4. 吉林大学材料科学与工程学院 长春 130025;5. 长春伟孚特汽车零部件有限公司 长春 130000)

摘要:从理论分析、数值模拟、试验研究上对汽车车身超高强度硼钢热成形技术进行研究。以汽车门内防撞梁热成形为例,分析高温下热成形硼钢的成形性能影响因素及其规律,指出硼钢热成形的最佳温度区间为750~800 ℃,进而用数值模拟的方法进行门内防撞梁模具工艺设计、用优化仿真的方法确定模具冷却管道设计并通过试验的方法进行确认,最后用设计的模具进行硼钢的拉延成形并对产品进行硬度测试、拉伸试验及金相分析,测试的维氏硬度均大于430,材料的屈服强度为 1 100 MPa,强度极限达到1 430 MPa,观察到的马氏体组织比较均匀,这些试验结果证明方法的可行性。从而为汽车热成形产品提供了可用于产业化生产、切实可行的一套理论分析、数值模拟及试验研究相结合的技术。 关键词:热成形 成形性 理论分析 数值模拟 硼钢 中图分类号:TH825

Research on Boron Steel for Hot Forming and Its Application

MA Ning1, 2 HU Ping1, 2 YAN Kangkang3 GUO Wei4 MENG Xiangbing5 ZHAI Shuji5

(1. State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian 116024;

2. School of Automobile Engineering, Dalian University of Technology, Dalian 116024; 3. Institute of Auto-body and Die Engineering, Jilin University, Changchun 130025; 4. College of Materials Science and Engineering, Jilin University, Changchun 130025; 5. Changchun Vehicle Advanced Forming Technology Co., Ltd, Changchun 130000)

Abstract:Theoretical analysis, numerical simulation and experiments of hot forming for ultra high strength boron steel are studied. The hot forming influence of boron steel is analyzed and the best temperature range 750~800 ℃ for hot forming is obtained. Then the design of the reinforced beam’s die, the cooling system and technique process are implemented by the methods of numerical simulation, optimization and experiments. The experimental results of boron steel components formed by the designed die show that the hardness value presents a homogenous distribution and the Vickers hardness is higher than 430, the yield limitation of the warm forming material is 11 000 MPa, the strength limitation is 1 430 MPa and that the martensite is homogenous. These results indicate the feasibility of the methods. Feasibility methods including theoretical analysis, numerical simulation and experiments are provided to the design of the die and manufacturing process of hot forming for vehicle components.

Key words:Hot forming Formability Theoretical analysis Numerical simulation Boron steel

0 前言

安全、环保、节能成为当前汽车制造业发展的* 国家自然科学基金重点资助项目(10932003)。20091008收到初稿,20100128收到修改稿

主题,采用高强度钢板冲压件制造车身既可以减轻车体重量,又能提高安全性,是同时实现车体轻量化和提高碰撞安全性的最好途径。高强度钢板,强度越高,越难成形。尤其是当强度达到1 500 MPa时,常规的冷冲压成形工艺几乎无法成形。因此,如何实现高强度钢板的高精度冲压成形就成为一项

第1页

你可能喜欢

  • 快速成形技术
  • 快速成形
  • 技术规定
  • 技术资料
  • 技术中心
  • 技术指导

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email