Automatic analyzers are connected to the station
computer through a serial port; however the automated measurement station has four automatic analyzers, so we had to find an efficient way to connect all four devices to one serial port. The solution was the “Octopus" serial port, which ramifies into several serial ports. This solution proved to be very simple but at the same time very stable. The station computer is connected to the IMROH server with a network cable capacity is 100 Mb/s. In the future we intend to replace the existing network cable to increase the capacity to 1 Gb/s.
IV. WEB APPLICATION EXAMPLES
IMI DEM Maker (Figure 4) is fully automated,
just like the measurement station. This is important in case of prolonged power failure, because the system automatically resumes monitoring air quality and creating DEM files as soon as the power is restored.
The Web application for air quality monitoring
is a part of the IMROH's Web site (Figure 5 or visit ), which is publicly available to the external Web users. The application displays current air quality measurements in a table and a 24-hour graph. Additional functionalities will be added towards creation of Web portal for air quality monitoring as a significant part of an information system at IMROH.
V. CONCLUSION
In this paper we present main functionalities of
the specialized information system for presentation of air information at the Institute for Medical Research and Occupational Health (IMROH). This system has been developed accordingly to the EU and national air quality and information exchange legislation, the IMROH role in developing of Environmental Information System (EIS) for the Croatian Environment Agency (CEA) and the requirements of different user groups.
At this point we can say that the most important
aspects of information systems at IMROH are application for creating Air Quality - DEM files, which entails setting up a file transfer to an information system for air quality of CEA, and Web application for monitor air quality as part of future more comprehensive Web portal. In the future we intend to develop new subsystems of IMROH’s information system to completely fulfil recommendations set by EEA and CEA. For example, we will add the new functionalities such as creation of an archive of pollutant concentrations for each measured pollutant and by days, introduce the air quality indicators and an air quality prediction model in combination with raster images of the Zagreb City.
REFERENCES
[1] EEA, “Annual Report 2009 and Environmental statement 2010”,
European Environment Agency, Copenhagen, 2010, pp. 92. .
[2] European Commission Environment, “Handbook on the
Implementation of EC Environmental Legislation
[3] W. Garber, J. Colosio, S. Grittner, S. Larssen, D. Rasse, J.
Schneider, M. Houssiau, “Guidance on the Annexes to Decision 97/101/EC on Exchange of Information as revised by Decision 2001/752/EC“, for the European Commission, DG Environment, 2002, pp.71.
[4] CEA, “Annual Report 2009”, Croatian Environment Agency,
Zagreb, 2010, pp. 24. .
[5] Croatian Parliament, “Croatian Law on Environmental
Protection”, NN 110/07
[6] Ministry of Environmental Protection, Physical Planning and
Construction, “Regulation on the exchange of information on the data from the network for permanent air quality monitoring”, NN 135/ 06
[7] G. Endregard, K. Karatzas, K.-H. Carlsen, I. Floisand, B. I.
Skaanes, S. Larssen, “EEA air quality web dissemination solution - Recommendations for further development”, The European Topic Centre on Air and Climate Change (ETC/ACC), Technical Paper 2006/9, 2007, pp. 79.
[8] UK Air Quality Archive Web site, , 2011. [9] Y. J. JungI, Y. K. Lee, D. G. Lee, K. H. Ryu and S. Nittel, “Air
Pollution Monitoring System based on Geosensor Network”, Geoscience and Remote Sensing Symposium, 2008. IGARSS 2008. IEEE International
A. A. Alesheikh, A. K. Oskouei, F. Atabi and H. Helali, “Providing interoperability for air quality in-site sensors observations using GML technology”, Int. J. Environ. Sci. Tech.

2005, Vol. 2, No. 2, pp. 133 - 140
Figure 4. IMI DEM Maker interface
Figure 5. IMROH air quality monitoring Web page

DOAS系统与其他环境空气自动 化监测系统 相同, 是一套区域性空气质量的实时监测网络, 由 若干个自动监测子站、 中心计算机控制室、 质量保 证实验室和系统支持...
网络化程度都有比较明显的差异,两国环境空气质量自动检测系统的基本 构成如图所示: 图1.1a 中国环境空气质量自动检测系统基本构成图 图1.1b 英国环境空气质量自动...
2009年第3期 工业仪表与自动化装置 ?109? 基于无线传感器网络的空气质量监测...与传统的空气 质量监测系统相比,使用传感器网络进行环境监测 1监测系统的体系结构...
TH-2000 系列环境空气质量自动监测系统由一个中心站和若干个子站组成,子站的数据采集控制系统 与中心站的数据处理控制系统通过通讯网络进行数据传输,完成数据采集处理...
空气质量监测系统——CPR-KA 城市级大气环境自动监测...系统将在环境监控中心安装一个视频显示屏及建立一个... 结合国 际上成熟的电子技术和网络通讯技术研制、 ...
1. 环境空气质量自动监测系统 1.1 概述 1.1.1 建立系统的必要性和目的 随着我国城市建设和经济的高速发展,不可避免地带来了生活、工业和交通排放废气量的增 ...
环境空气质量自动监测系统[1]_经管营销_专业资料。环境空气质量自动监测 仪器简介《TH-2000型环境空气质量自动监测系统》。 主要部件包括TH-2001氮氧化物分析仪、 ...
空气质量自动监测系统数据无线发射方式 技术方案 生产单位:北京泰华恒越科技发展...AQM60 系列一.前言 环境保护监测先行,自动化、信息化是做好环境监测的前提和...
一种方法,本文 介绍了传感器在空气质量检测方面的原理应用及监控系统的网络设计...预计将在消费类电子设备、家庭智能化、工控、医用设备控制、农业自动化等领域获得...
22 No. 1 Feb. 2006 环境自动监测系统网络化改造与 质量控制技术监督方案探讨吴宇光摘 ( 厦门市环境监测中心站, 福建 厦门 361004) 要: 随着网络技术的发展与...
热门文档