文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 农林牧渔 > 畜牧兽医 > 英国伦敦林肯郡祖代肉种鸡场参观2013.1.2
侵权投诉

英国伦敦林肯郡祖代肉种鸡场参观2013.1.2

参观伦敦祖代肉种鸡场,观看自动撒料机和自动称重系统。

Time Set (Mins) – sets the current clock time minutes.

时间设置(分钟)-设置分钟。

Security – allows the STICK controller to prevent adjustment of all of the parameter values. With this set to 234, all parameters can be adjusted. Any other number will lock all settings to their current state.

安全按钮-STICK 控制器可以防止改变参数。控制器安全按钮设置到234, 所有参数可以被调整。设置到任何其他数字,将锁定当前的参数。

Spec. Function – this is used by the commissioning engineer and is not needed for daily operation except if modification of the actual feed

consumption values is required. In this instance “Spec. Function” needs to be set to “8”

特殊功能键- 除非确实需要调整撒料量,此键只有工程师用来调节试运行不是用来日常操作的。调整撒料量时,需将特殊功能键设置到

8.Stick ID Code – is for computer networking purposes only.

STICK ID 码- 仅计算机网络化使用。

Blender Alarm – with this set to ON, if the feed weigher hopper takes more than 90 seconds to complete a cycle then an alarm state is triggered. This causes the input auger to be disabled and in order to reset the alarm the parameter has to be set to OFF.

搅拌机警钟- 此键设置到ON(开),称重料斗完成循环需要90秒钟以上警钟键会发动扳机从而使输入螺旋钻停止工作。需要重设警钟参数的话,需要把警钟键设置到OFF(关)。

Number of Resets – this is used by the engineer to diagnose possible interference problems. In the event that there is a power failure, this number will assume a random value.

重启数量- 是帮助工程师诊断可能突发问题的。 供电不足 的话会出现任意值。

Man/Test测验

Generally this menu allows the engineer to operate the various controller outputs manually for diagnostic purposes. The Active Outlet parameter can both override the valve outlet outputs in manual mode and signal to the operator the current active outlet in automatic mode.

上一页第6页

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email