文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > DESIGN OF LARGE SCALE HYDRODYNAMIC MODELS OF OFFSHORE STRUCTURES
侵权投诉

DESIGN OF LARGE SCALE HYDRODYNAMIC MODELS OF OFFSHORE STRUCTURES

This paper discusses the design of hydrodynamically scaled models of offshore structures subjected to wave loading. A considerable amount of engineering design and analysis is required to ensure the high performance of a model/dynamometer system, especiall

DESIGN OF LARGE SCALE HYDRODYNAMIC MODELS OF OFFSHORE

STRUCTURES

M. Booton

Faculty of Engineering and Applied Science

Memorial University of Newfoundland

St. John’s, Newfoundland, Canada

K. Szeto, J. Murray, G. Fudge

Institute for Marine Dynamics

National Research Council of Canada

St. John’s, Newfoundland, Canada

ABSTRACT

This paper discusses the design of hydrodynamically scaled models of offshore struc-tures subjected to wave loading. A considerable amount of engineering design and analysis isrequired to ensure the high performance of a model/dynamometer system, especially whendealing with large scale models (for example, 1:40). The system is designed to be as rigid aspossible so that the dynamometer measures wave loading without dynamic amplificationcaused by structural vibrations. (Ideally, the system would consist of a low mass, rigid modeland a dynamometer having a stiffness which is as high as possible while having the requiredload sensitivity and capacity). The primary constraints are geometry (related to the hydrody-namic scaling of the model), load measurement accuracy over a specified range, and specifiedwave parameters. In order to satisfy these constraints, the dynamometer components must beappropriately sized and the model/dynamometer system must be designed to have a suffi-ciently high natural frequency.

Primarily, this paper deals with the problem of designing a high natural frequencymodel/dynamometer system. In order to avoid dynamic amplification effects, it is necessary toensure that the lowest natural frequency of the system is several times larger than the highestwave frequency. The stiffness of the system is dictated by the structural configuration andmaterial of the model and by the flexibility of the dynamometer. The added mass associatedwith the water entrained by the model can be significant and must be taken into account, inaddition to the structural mass, when estimating natural frequencies. Examples dealing withpreviously tested hydrodynamically scaled models of offshore structures such as gravity basestructures and jacket platforms are presented. Other design considerations are briefly dis-cussed.

INTRODUCTION

Model testing of offshore structures subjected to wave loading is an important phase ofthe prototype design process and is used to verify numerical or analytical predictions of globaland local hydrodynamic loads on the prototype and its components. Examples of global loadsare shear and overturning moment at the base of the structure. Local loads include wave im-pact, run-up, etc. Recent projects [1,2,3,4] at the National Research Council of Canada Insti-tute for Marine Dynamics (NRC/IMD) have involved the testing of various large scale models

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email