The preparation and tribological properties of Carbon fiber reinforced PTFE composite
The preparation and tribological properties of Carbon fiber reinforced PTFE composite filled with carbon nanotube
Abstract
The main objective of this paper is to develop high wear resistance carbon fiber reinforced polytetrafluoroethylene (PTFE) composite with addition of multiwall carbon nanotube (MWCNT). These compounds were well mixed in a Haake batch mixer and compounded polymers were fabricated into sheets of known thickness by compression moulding. Tribological properties of polytetrafluoroethylene (PTFE) composites filled with carbon fibers (CF), sliding against GCr15 steel under dry sliding condition, were investigated on a block-on-ring M-2000 tribometer. The tribological properties of these samples depend on filler aspect ratio. The wear surface has been examined using scanning electron microscope (SEM). Photomicrographs of the worn surfaces revealed the effect of the addition of carbon nanotube.
Keywords: Carbon Fiber, Multiwall Carbon Nanotubes, PTFE; SEM; compression moulding Introduction
Polytetrafluoroethylene (PTFE) is an ideal self-lubricating material which has very low friction coefficient, high thermal stability and chemical stability [1, 2]. But it can not be used as anti-wear material alone because of its poor mechanical properties, bad thermal conductivity and high wear rate [3]. Carbon fibers (CF) are widely used as fillers in composite materials due to their high specific strength, high modulus and high resistance to fatigue and creep [4, 5]. There have been rapid growth in the developments and applications of fiber reinforced thermoplastic polymer composites. This is due to the
Effect of Rare Earths on Tribological Properties of Carbon Fibers Reinforced PTFE Composites_专业资料。维普资讯 http://www.cqvip.com Avibeolea all ni ...
ber-reinforced PTFE composites [17]. And sol–...the tribological properties of the PTFE composites ...Preparation of surface modi?ers and modi?cation ...
Carbon fiber reinforced ... 20页 免费 Carbon ...the tribological properties, but the load affected...Many kinds of preparation technologies such as ...
Tribological Properties of Polyvinyl Alcohol Hydrogel Reinforced with Nanometer ... Preparation of Aminate... 11人阅读 8页 2.00 Property of Polyvinyl ...
and tribological properties of carbon fabric ...carbon/carbon composites reinforced with fabric [9...This article deals with the preparation and ...
uence of carbon ?ber oxidation on the tribological behavior of the 3D-...However, studies on preparation and properties of 3D carbon ?ber reinforced ...
interface bonding between carbon fiber and PTFE ...reinforced PTFE (CF/PTFE) composites modified with...Secondly, the tribological properties of the PTFE ...
Effect of carbon fiber... 暂无评价 7页 1下载...and tribological properties of multi-element (...Film preparation The preparation of equimolar ...
llers have been incorporated to enhance the tribological properties of PEEK.7...of carbon fiber reinforced polymer composites under dry sliding and water ...
Recently, the tribological properties of CNTs reinforced copper composites ...[29] W.M. Daoush, Preparation of Copper Based Friction Materials by ...
热门文档