THERMAL CONDUCTIVITY OF PARTICLE REINFORCED POLYMER COMPOSITES
449
THERMAL CONDUCTIVITY OF PARTICLE REINFORCED POLYMER COMPOSITES
I.H.Tavman
Mechanical Engineering Department
Dokuz Eylül University, 35100 Bornova /Izmir – Turkey.
Abstract: In this paper a survey of literature on thermal conductivity of nanometer sized particle and fiber filled polymer composites are given as well as thermal conductivity of nanofluids (nanoparticles in suspension in fluids). Also models predicting the effective thermal conductivity of composites filled with particles are stated and are compared with experimental data with micro-sized Al2O3 particle filled HDPE composite.
1. INTRODUCTION
In order to obtain materials of desired thermal, mechanical and electrical properties, matrix materials, such as polymers, are processed with different kind of fillers. Fillers may be in the form of fibers or in the form of particles uniformly distributed in the polymer matrix material. Many of the properties of fibrous composite materials are strongly dependent on the fiber properties as well as on microstructural parameters such as fiber diameter, fiber length, fiber length distribution, volume fraction of fibers and the alignment and packing arrangement of fibers. It is evident that thermophysical properties of fiber filled composites are anisotropic, except for the very short, randomly distributed fibers. Whereas, thermophysical properties of particle filled polymers are isotropic. Many theoretical, numerical and experimental studies exist about thermal conductivity of micrometer sized particles and fiber filled polymer composites.
Recently, techniques have been developed to process matrix materials with nanometer sized grains, particles and fibers. These filler may be used as an effective strategy for either increasing or reducing heat transfer rates of composite materials. There are very few publications about thermal conductivity of nano particle and fiber filled polymer composites, a recent research by Putman et al. [1] used the 3ω method to study the thermal conductivity of composites of nanoscale alumina particles in polymethylmethacrylate (PMMA) matrices in the temperature range 40<T<280 K. For 10% of 60 nm of alumina particle filler by weight (3.5% by volume) thermal conductivity of the composite is slightly decreased at low
In addition, the mean particle sizes of 1.5 m...thermal conductivity of silicone rubber composites ...The base silicone polymer and fillers were weighed...
Fabrication and thermal conductivity of copper matrix composites reinforced by tungsten-coated c_专业资料。Ienaia ounl ieasntrtonlJra Mnrl,Mealryad eil oftlg ...
Constitutive Modeling of... 暂无评价 17页 免费 THERMAL CONDUCTIVITY ... ... Constitutive Modeling of Nanotube-Reinforced Polymer Composites In this study,...
A thermal conductive model of particle filled polymer composites was proposed...A series of thermal conductivity coefficient of LDPE/graphite composites ...
Introduction Thermal conductivity of polymers is an... polymers reinforced with fillers, organic or ...polymer composites for these applications (Hodgin &...
( 11) : 38833889. 〔 2〕 Tekce H S,Kumlutas D,Tavman I H. Effect of particle shape on thermal conductivity of copper reinforced polymer composites〔...
composites used for thermal interface material”, ...H. Tavman, “Effect of Particle Shape on Thermal conductivity of Copper Reinforced Polymer ...
Abstract : A thermal conductive model of particle ?lled polymer composites ...of thermal conductivity coefficiDPE/graphite composite at 45℃ 图4和 图5表 ...
of thermally conductive silicone rubber reinforced ...polymer-matrix composites[外文期刊] 2001(05) 5....thermal conductivity of woven pristine and ...
reinforced polymer composites It is simply a ...(1) the particle size must be extremely small,...(耐磨性), thermal conductivity(热传导率), and ...
热门文档