理音 粘度计VT-03F/VT-04F 说明书
● VT-04F
The No.1 rotor and No.2 rotor are designed for making measurements using a JIS 300mL beaker containing about 350mL of sample fluid. If another container is used, the viscosity resistance working on the rotor will be different, leading to deviations in the measurement result. If a different container has to be used, make sure that it is considerably larger than the JIS 300mL beaker. In this case, the obtained measurement values will be about 5% lower.
The No.3 rotor must be combined with the No.3 cup, otherwise large errors will occur in the reading.
*The actual capacity of the JIS 300mL beaker is about 420mL.
●The viscosity scale readings for the various rotor types overlap in part. For example, the following viscosity ranges can be measured with the following both rotors:
VT-03F: 15 to 33 mPa.s: No.4 or No.5 rotor
50to 150mpa.s: NO.5 or NO.3 rotor
VT-04F:3 to 13dPa.s: No.3 or No.1 rotor
100 to 150 dPa.s: No.2 or No.1 rotor
However, depending on the properties of the sample fluid and on mechanical calibration results, the obtained measurement values may be different when changing rotors. To facilitate the correct evaluation of data, you should therefore note the rotor number along with the
VT-03F粘度计 vt-04F粘度计对比_机械/仪表_工程科技_专业资料。介绍了日本理音产品,vt-03F粘度计,以及vt-04f粘度计的对比。VT-03F 粘度计与 VT-04F 粘度计...
VT-03F粘度计 vt-04F粘度计对比_机械/仪表_工程科技_专业资料。介绍了日本理音产品,vt-03F粘度计,以及vt-04f粘度计的对比。VT-03F 粘度计与 VT-04F 粘度计...
热门文档