SimpliciTI 是针对低射频网络的简单低功耗射频网络协议。这种网络通常包含要求电池寿命长、数据速率和小占空比低的电池供电设备,并具有少量可以直接相互通话或通过接入点或范围扩展器进行通话的节点。不需要接入点和范围扩展器,但提供诸如存储和转发消息的额外功能。有了 SimpliciTI,MCU 资源要求将降低,实现低系统成本。
5. Under C:\Texas Instruments\SimpliciTI-IAR-1.1.0\Projects\Examples, take a copy of the
SRF04 folder, paste it under the Examples folder, and name it srfccxx10 (see Figure 3). The examples in the SRF04 folder is written for the CC1110 and CC2510 radios and

can easily be modified to work on the SmartRF CCxx10 Target Boards.
Figure 3. The srfccxx10 Folder Containing all the SimpliciTI Examples
The next step is to change the project settings. This design note will show how this is done for one of the examples (Polling with AP), but the procedure will be identical for all of the examples.
6. Open the Polling with AP workspace found under: C:\Texas Instruments\SimpliciTI-IAR-1.1.0\Projects\Examples\sfrccxx10\Polling_with_AP\IAR. 7. Select Edit Configuration in the Project

pull-down menu (see Figure 4).
Figure 4. Edit Configuration
8. Remove all configurations that are not for the CC1110 or CC2510. The configurations

Figure 5. Remove Configuration
使板级的初始化明确与 SimpliciTI 初始化分开, 可以更容易地移植到另一个目标...大部分无线 寄存器都是基于 SmartRF Studio 输出代码,并且默认的通道设置在频道...
只针对 CC25xx/CC11xx 无线射频的:SimpliciTI 使用 SmartRF Studio 配置工具设置外部 寄存器。 这个工具通过空中射频和控制寄器设置寄存器。 SimpliciTI 使用空中 RF ...
4.2 Radio 配置 SimpliciTI 开发者文档 5 / 17 SimpliciTI 开发者文档 源码文件中使用的 Radio 初始值由 TI 公司的 SmartRF04 工具生成。代码的发 行版中包含...
SimpliciTI Notes: For CC2500, CC2510 & CC2511 In SmartRF Studio Set RF (base) frequency to 2425.0 MHz Set Channel (spacing) to 250 KHz Notes: ...
无法做协议分析 1、将 CC-Debugger 连接到 BLE-SmartRF 开发板(或者 SmartRF-...SimpliciTI 捕获 TI 的 SimpliciTI 协议数据包 IEEE802.15.4/Zigbee(CC2420) ...
(比如.:CC2430EM -> 32, CCxx10 -> 26, SmartRF05EB + CC2520EM -> 24)....CC2510和CC1110用于以下协议: 1) SimpliciTI 2) Generic. 硬件平台有SmartRF04...
(比如.:CC2430EM -> 32, CCxx10 -> 26, SmartRF05EB + CC2520EM -> 24)....CC2510和CC1110用于以下协议: 1) SimpliciTI 2) Generic. 硬件平台有SmartRF04...
热门文档