文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 机械/仪表 > FMVSS_571.213
侵权投诉

FMVSS_571.213

美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档

§571.213

mounting of the vehicle shall retain not less than the minimum portion of the windshield periphery specified in S5.1 and S5.2.

S5.1Vehicles equipped with passive re-straints. Vehicles equipped with passive restraint systems shall retain not less than 50 percent of the portion of the windshield periphery on each side of the vehicle longitudinal centerline. S5.2Vehicles not equipped with pas-sive restraints. Vehicles not equipped with passive restraint systems shall re-tain not less than 75 percent of the windshield periphery.

S6. Test conditions. The requirements of S5. shall be met under the following conditions:

S6.1The vehicle, including test de-vices and instrumentation, is loaded as follows:

(a) Except as specified in S6.2, a pas-senger car is loaded to its unloaded ve-hicle weight plus its cargo and luggage capacity weight, secured in the luggage area, plus a 50th-percentile test dummy as specified in part 572 of this chapter at each front outboard designated seat-ing position and at any other position whose protection system is required to be tested by a dummy under the provi-sions of Standard No. 208. Each dummy is restrained only by means that are installed for protection at its seating position.

(b) Except as specified in S6.2, a mul-tipurpose passenger vehicle, truck or bus is loaded to its unloaded vehicle weight, plus 136 kilograms or its rated cargo and luggage capacity, whichever is less, secured to the vehicle, plus a 50th-percentile test dummy as specified in part 572 of this chapter at each front outboard designated seating position and at any other position whose pro-tection system is required to be tested by a dummy under the provisions of Standard No. 208. Each dummy is re-strained only by means that are in-stalled for protection at its seating po-sition. The load is distributed so that the weight on each axle as measured at the tire-ground interface is in propor-tion to its GAWR. If the weight on any axle when the vehicle is loaded to its unloaded vehicle weight plus dummy weight exceeds the axle’s proportional share of the test weight, the remaining weight is placed so that the weight on

49 CFR Ch. V (10–1–02 Edition)

that axle remains the same. For the purposes of this section, unloaded vehi-cle weight does not include the weight of work-performing accessories. Vehi-cles are tested to a maximum unloaded vehicle weight of 2,495 kilograms.

S6.2The fuel tank is filled to any level from 90 to 95 percent of capacity. S6.3The parking brake is dis-engaged and the transmission is in neu-tral.

S6.4Tires are inflated to the vehicle manufacturer’s specifications.

S6.5The windshield mounting mate-rial and all vehicle components in di-rect contact with the mounting mate-rial are at any temperature between ¥9 degrees Celsius and +43 degrees Cel-sius.

[41 FR 36494, Aug. 30, 1976, as amended at 42 FR 34289, July 5, 1977; 45 FR 22046, Apr. 3, 1980; 60 FR 13647, Mar. 14, 1995]

§571.213Standard No. 213; Child re-straint systems.S1. Scope. This standard specifies re-quirements for child restraint systems used in motor vehicles and aircraft.

S2. Purpose. The purpose of this standard is to reduce the number of children killed or injured in motor ve-hicle crashes and in aircraft.

S3. Application. This standard applies to passenger cars, multipurpose pas-senger vehicles, trucks and buses, and to child restraint systems for use in motor vehicles and aircraft. S4. Definitions.

Add-on child restraint system means any portable child restraint system. Backless child restraint system means a child restraint, other than a belt-posi-tioning seat, that consists of a seating platform that does not extend up to provide a cushion for the child’s back or head and has a structural element designed to restrain forward motion of the child’s torso in a forward impact. Belt-positioning seat means a child re-straint system that positions a child on a vehicle seat to improve the fit of a vehicle Type II belt system on the child and that lacks any component, such as a belt system or a structural element, designed to restrain forward movement of the child’s torso in a for-ward impact.

第1页

你可能喜欢

热门文档

相关文档

  • FMVSS_571.301

    FMVSS_571.301_机械/仪表_工程科技_专业资料。美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档Nat’l Highway Traffic Safety ...

  • FMVSS_571.304

    美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档...

  • FMVSS_571.216

    FMVSS_571.216_机械/仪表_工程科技_专业资料。美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档§ 571.215 plane is six inches...

  • FMVSS_571.116

    美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档...

  • FMVSS213儿童保护装置中文版

    FMVSS213儿童保护装置中文版_机械/仪表_工程科技_专业资料。FMVSS213儿童保护装置中文版§571.213 49 联邦法规全书(CFR)第 V 章(2002 年 1 月 10 日版) ...

  • FMVSS_571.131

    FMVSS_571.131_机械/仪表_工程科技_专业资料。美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档§ 571.131 § 571.131 Standard...

  • FMVSS_571.401

    美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档...

  • FMVSS_571.121

    FMVSS_571.111 10页 3下载券FMVSS_571.121 暂无评价0人阅读0次下载举报文档 美国联邦...

  • FMVSS_571.129

    美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档...

  • FMVSS_571.119

    美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档美国联邦机动车安全标准(fmvss) 49 CFR 571 包含FMVSS_571目录框架和各项目文档...

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email