Bortoni and Silva
5.EFFORTS IN POWER AMPLIFIERS
To demonstrate the applicability of the electricalequivalent models presented in items2and3,onegeneratedthe load lines, current x voltage(IC×VCE),corresponding to a Class B power output stage , able to deliver 100 wattsto a 8 ohms load(Figures 29 to 43).The used loads correspond to theimpedance curves inFigures 15to 28.To helpcomparing the different efforts from complexes loads as drivers and loudspeakers, to the power outputstage,one also presented the results froman 8 ohmsresistance, as inFigure 29.Figures 29to 43wereobtained from [5].Comparing the graphicswe cansee that a more complex load is more demanding tothe power amplifier.In the three way second orderpassive crossover network (Figure 43), we have twice the current in the power stage.The dissipated powerin all examples (Figures 30 to 43), also increasedduethe power factorcos ,where is the phase anglebetween voltage and current in the load.The methodfordimensioningpower stages shown in [5], together with the electric models shown in this work, forms a

powerful tool for audio amplifiers designers.
Loudspeakers' Electric Models
Figure 31. Infinite Baffle load (Figure 16).
Figure 32.

Closed Box load (Figure 17).

Figure 29. 8 ohms (resistive)

load.
Figure 33. Closed Box load (Figure 18).
Figure 30. Infinite Baffle load (Figure

15).

Figure 34.Vented Box load (Figure19).
AES 115TH CONVENTION, NEW YORK, NEW YORK, 2003 OCTOBER 10-13
热门文档