Figure 3. Mathematical procedure for obtaining a full spectrum.
forward and reverse components of the filtered orbits. Thehorizontal coordinate equals ±frequency (+ for the forwardand – for the reverse components), and the vertical coordi-nate equals the peak to peak amplitude of the correspondingforward or reverse component.
In ADRE®for Windows, the full spectrum is obtained asthe result of an FFT transformation of the sampled signals.The X component is the direct input, and the Y component isthe quadrature input (Figure 3). Half spectrums are obtainedindependently from X and Y sampled signals. Each of themis considered as the direct input to the FFT, while the quad-rature input is zero.
It is important to note that the full spectrum forward andreverse component amplitudes can be used to recover theshape of the corresponding filtered orbit.Determining theorientation of the orbit is not possible in the full spectrumwithout the relative phase information, however. There is noway to make anyjudgment on the shape of the filtered orbitusing half spectrums.
What can it do for me?
So, now that we know how a full spectrum is created, andwhat additional information it contains in comparison to ahalf spectrum, the question is, “how can it be used?” In orderto perform reliable diagnostics, all possible information hasto be extracted from the available data. Since full spectrumcontains more information than the half spectrum, it has anadvantage from that perspective. It can be used for steadystate analysis (full spectrum, full spectrum waterfall) or fortransient analysis (full spectrum cascade).
One of the possible applications of full spectrum is foranalysis of the rotor runout caused by mechanical, electrical,or magnetic irregularities. Depending on the periodicity ofsuch irregularities observed by the XY proximity probes, dif-ferent combinations of forward and reverse components areobserved. The rules for such an analysis are summarized inTable 1. The amplitude and frequency components generatedby the irregularities of the rotor do not change with rotativespeed, unless there is a change in the rotor axial position. Inthat case, a new pattern will emerge, but it will follow thesame rules.

The full spectrum is unaffected by probe orientation orprobe rotation, as is the orbit.The X and Y half spectrumsare dependent on the actual probelocations and can change dramati-cally with changes in their orienta-tion. These characteristics, alongwith the enhanced applications of
the full spectrum, make it superior
Table 1. Runout signature analysis.to the half spectrum.

20
Orbit
First Quarter 1999
旋转机械频谱分析在设备故障诊断中的应用_专业资料。阐述了频谱分析的工作原理、作用及应用的方法和步骤,通过实例分析了旋转机械频谱分析在设备故障诊断中的应用,结果...
结合Multi-agent技术开发了基于频谱图像识别的Multi-agent旋转机械故障诊断系统,解决了诊断软件的通用性和适应性之间的矛盾。应用表明,该系统是实用的、有效...
倒频谱分析在旋转机械故障诊断中的应用 - 第 14 卷第 3 期 1999年8月 长 ( 自 ) 沙电力学院学报然科学版 J ...
故障诊断仪器的广泛应用 , 使对机械 设备的维护由计划 、 定期检修走向状态 、...图 2 号测点位移频谱图 3 图 3 号测点速度频谱图 3 3 在旋转机械运行中...
振动信号分析在旋转机械故障诊断中的应用_机械/仪表_工程科技_专业资料。信号...特别是,一些原来频谱图上不存在或 比较微弱的频率分量突然出现并扶摇直上,可能...
时频分析及在旋转机械故障诊断中应用刘功生南华大学 ...所以他确实反映了非平稳信号的时变频谱特性,加之 ...心电图信号分析等;在结构分析领域,如桥梁的监测、...
循环自相关函数在旋转机械故障诊断中的应用 本文首先介绍了二阶循环平稳理论的基本理 论 ,然后通过调幅仿真信号的处理指出可以利用循 环自相关函数的循环谱图对信号...
小波分析在旋转机械故障诊断中的应用黑开伟(武汉...频谱相匹配,从而能有效解决了旋转机械故障诊信号处理...目标处理 【中图分类号】TP206 【文献标识码】A ...
旋转机械故障诊断 旋转机械是指依靠转子旋转运动进行工作的机器, 在结构上必须...3)频谱图上转子转动频率处的振幅。 4)在三维全息图中,转动频率的振幅椭圆较大...
旋转机械的故障诊断【关键词】状态监测 旋转机械 故障诊断 【摘要】机械振动是...图 2 SH8011 隧道烘梗机故障前的频谱图 图 3 SH8011 隧道烘梗机故障前的...
热门文档