文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 能源/化工 > RTL8723BS蓝牙WiFi FM三合一模块(RL-SM02BS-8723BS)规格书
侵权投诉

RTL8723BS蓝牙WiFi FM三合一模块(RL-SM02BS-8723BS)规格书

纳拓科技应用RTL8723BS开发设计的WiFi蓝牙FM三合一多功能无线通信模块,在产品集成应用中有广泛应用,相关应用咨询可邮件hsdgood@163.com

Wireless module before the SMT note:

1.When customers Open stencil must be sure the hole bigger to the Wireless module plate, please press 1 to 1 and 0.7 mm is widened to open outward, the thickness of 0.12 mm.

2.有需要拿wifi模块时不可以光手去拿,一定要戴上手套以及静电环.

2.Can't get the wifi module bare hands when needs,must we wear the gloves and static ring.

3.The furnace temperature according to the size of the customer the mainboard ,generally like to stick on a tablet standard temperature of 250 + - 5,can do 260 + - 5.

Wifi模块储存及使用管制应注意事项如下:

3.过炉温度要根据客户主板的大小而定,一般像平板电脑上的标准温度为250+-5°,也可以做到260+-5° Wifi模块贴片装机前注意事项:

1.客户在开钢网时一定要将wifi模块焊盘的孔开大,请按1比1再向外扩大0.7mm比例开钢网,厚度按0.12mm.

Storage and use Wifi module control should pay attention to the following matters:

1.Module of the storage life of vacuum packaging:

1.模块的真空包装之储存期限:

1-1.保存期限:12个月,储存环境条件:温度在:<40℃,相对湿度:

1-1.Storage life:12 months. Storage conditions:<40℃. Relative <90%R.H. humidity:<90%R.H. 1-2.模块包装被拆后,SMT组装之时限:

1-2.After this bag is opened , devices that will be subjected to 1-3.检查湿度卡:显示值应小于30%(蓝色),如:30%~40%(粉红色)infrared reflow, vapor-phase reflow, or equivalent processing must

或者大于40%(红色)表示模块已吸湿气.

be :

① 工厂环境温度湿度管制:≦30%℃,≦60%R.H。

1-3.Check the humidity card :stored at ② 拆封后,车间的保存寿命为168小时.

1-4.如在拆封后的168个小时内未使用完,需要烘烤,烘烤条件如下:

≦20%RH.If :30%~40%(pink)or greater than 40%(red).Labeling ① 模块须重新烘烤,以除去模块吸湿问题.

② 烘烤温度条件:125℃,8小时. module has moisture absorption.

③ 烘烤后,放入适量的干燥剂再密封包装.

① Mounthed within 168 hours at factory conditions of:

1-5.模块真空包装每盘2000pcs,真空包装图片<1>

t≦30%℃,≦60%R.H.

② Once opened, the workshop the preservation of life for

168 hours.

2.模块卷盘包装事项如下:

1-4.If baking is required,devices may be baked for:

① Modules must be to remove module moisture problem. 2-1.保存期限:12个月,储存环境条件:温度在:<40℃,相对湿度:② Baking temperature: 125 ℃, 8 hours.

③ After baking, put proper amount of desiccant to seal <90%R.H. packages. 2-2.模块拆开包装168小时后,如要上线贴片需要重新烘烤,以除去模块吸湿问题,烘烤温度条件:125℃,8小时。 1-5.Module vacuum packing 2000 PCS per disc.

2-3.卷盘包装标准为每盘2000pcs,也可以1000pcs. 2.Module reel packaging items as follows.

2-1.Storage life:12 months. Storage conditions:<40℃. Relative humidity:<90%R.H.

3.模块托盘包装事项如下:

2-2.Module apart packing after 168 hours,To launch patch need to

3-1.保存期限:3个月,储存环境条件:温度在:<40℃,相对湿度:

bake, to remove the module hygroscopic, baking temperature

<90%R.H.

conditions:125℃,8hours.

3-2.模块如在48小时内未使用,在上线之前需要进行烘烤,烘烤温度

2-3.Reel packing 2000 PCS or 1000 PCS per disc.

条件:125℃,8小时。

3.Module pallet packaging items as follows:

3-1.Storage life:3 months. Storage conditions:<40℃. Relative 3-3.托盘包装每盘为100pcs,以1000pcs或2000pcs出货.

humidity:<90%R.H.

3-2.Module if not used within 48 hours, before launch the need for baking, baking temperature: 125 ℃, 8 hours.

3-3.Pallet packaging each plate is 100 PCS to 1000 PCS or 2000 PCS shipment.

上一页第11页

热门文档

相关文档

  • DJH-WF-98 wifi模块规格书

    智能家居WiFi模块规格书... 8页 免费 RTL8723BS蓝牙WiFi FM三... 11页 ...香港纳拓科技有限公司 HK Nater Tech Limited WiFi 模组承认书客户名称 Customer...

  • DJH-WF-98 wifi模块规格书

    智能家居WiFi模块规格书... 8页 免费 RTL8723BS蓝牙WiFi FM三... 11页 ...香港纳拓科技有限公司 HK Nater Tech Limited WiFi 模组承认书客户名称 Customer...

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email