激光致薄膜损伤的英文文献翻译
Effect of defects on long-pulse laser-induced damage of two
kinds of optical thin films
两种光学薄膜的缺陷对长脉冲激光造成薄膜的损伤的影响 In order to study the effect of defects on the laser-induced damage of different optical thin films, we carried out damage experiments on two kinds of thin films with a 1 ms long-pulse laser. Surface-defect and subsurface-defect damage models were used to explain the damage morphology. The two-dimensional finite element
method was applied to calculate the temperature and thermal-stress fields of these two films. The results show that damages of the two films are due to surface and subsurface defects,respectively. Furthermore, the different dominant defects for thin films of different structures are discussed.
激光对缺陷不同的光学薄膜会造成的不同损伤,为了研究,我们用1ms长脉冲激光对两种薄膜进行了实验。我们用表面缺陷和下表面缺陷的损伤模型来解释损伤的形态,用二维有限元法来计算这两种薄膜的温度场和热应力场。结果表明,两种薄膜的损伤分别由表面缺陷和下表面缺陷造成。另外,我们还讨论了不同结构的薄膜的不同主导缺陷。
1. Introduction前言
Optical coatings are important components in a laser system but are easily damaged. Damage to these components induced by the laser beam limit the output power and energy of the lasers. It is generally believed that defects in films initiate the damage
[1]. Currently, two damage models, the interfacial layer model and inclusion model, are widely used for film damage analysis. In the interfacial layer model, interface absorption in films, especially in multilayer films, is taken into account for analysis and calculation. The interface absorption is considered to take place at the
boundaries between the coating and substrate, air/coating, or film/film interfaces. And the overall interface absorption can be as large or even larger than that in the entire coating volume [2–4]. In the inclusion model, it is believed that defects, such as contaminants, impurities, and void fillers whose size can range from a few to several hundred nanometers, will be included in the film due to the impurity of the raw material and inhomogeneous film growth during the deposition process [5,6]. High absorption of laser energy by these inclusions causes film damage. The
distribution density, depth, and type of inclusions influence the damage properties. Evidence for the first assumption comes from the fact that laser damage of optical coatings most often occurs in isolated spots. Furthermore, artificial nanoparticles of a known size, depth, and even distribution density are introduced into film coatings for experimental and theoretical studies [7–10], which were focused on film damage induced by a short pulse laser with a pulse width of nanoseconds and below. Film damage induced by a long-pulse laser with a pulse width of milliseconds was not mentioned.
光学镀层是激光系统的重要组成部分,但很容易损伤。激光束会造成这些部件损伤,这会限制激光的输出功率和能量。人们普遍认为,损伤是由薄膜的缺陷造成
The laser-induced damage threshold (LIDT) and ...-pulse laser, but it has an accumulation effect...defects on the surface of the substrate,6,9 ...
It is known that the laser-induced damage is always caused by various defects in the coating or the substrate.3,12,13 Unlike a PVD (physical vapor ...
On the effect of corrosion defects on the ...conservative for some kinds of defects found in ...erent induced defects, and tested under external ...
Laser Induced Damage of Two kinds of Classical ...induced by impurit ies or t he defects in coat...long pulse laser int eract ion w it h opt ...
Effect of annealing processing on microstructure and properties of ...文献及翻译_军事/政治_人文社科_专业资料。此文仅供参考!Effect...
Surface Treatment Effect of (NH4)2Sx on p-...emitter array is irradiated with a pulse laser. ...uence of various chemical substances and defects ...
effect induced by femtosecond pulse laser at grain...As one can realized that, miscellaneous defects ...important stages of structural damage of grain ...
uses as light Repeaters, its main effect is B.... damage to the facets of laser diodes (9)List... Absorption by atomic defects in the glass ...
Boiler Industry etc Inspection of welds for all kinds of welding defects Automated TOFD and Pulse Echo Testing ASME Code Case 2235 allows for the ...
化学专业英语文献Effect o... 9页 5财富值 文献翻译:A novel multi-... ...capable of removing most of defects and attaining homogeneous and tough ...
热门文档