3.7.4Functional Integration
The CSDB standard provides much of the data needed for functional integration. The detailed messageblock de nitions give the interpretation of the address, status byte, and data words for each availablemessage. Given that a particular message is broadcast, the standard completely de nes the proper inter-pretation of the message. The standard even provides a system de nition, consisting of a suite ofprede ned buses which satisfy the integration needs of a typical avionics system.
If this prede ned system is applicable, most of the system integration questions are already answered.But if there is any variation from the standard, the designer of a subsystem in a CSDB integrated systemmust inquire to nd out which LRUs are generating the messages that the subsystem needs, on whichbus each message is transmitted, at what bus speed the messages are transmitted, and the type oftransmission. The designer must also ensure that the subsystem provides the messages required by otherLRUs. The system designer needs to coordinate this information accurately and comprehensively. Thesystem design must ensure that all the messages on a particular bus are of the same length. It must alsocontrol the data latencies that may result as data are passed from bus to bus by various LRUs. All testingis left to the system designer.
There are no additional guidelines published for the CSDB. Whatever problems are unaddressed bythe standard are addressed by Collins during system integration. Furthermore, Collins has not found theneed to formalize their integration and testing in internal documents since this work is done by CSDB-experienced engineers.
The CSDB, like the ARINC 429 bus, has only one LRU that is capable of transmitting with (usually)multiple LRUs receiving the transmission. Thus, the CSDB has few inherent subsystem integration prob-lems. However, the standard does not address them. The preface to the CSDB standard clearly states itsposition concerning systems integration:
This speci cation pertains only to the implementation of CSDB as used in an integrated system.Overall systems design, integration, and certi cation remain the responsibility of the systems integra-tor. (GAMA CSDB 1986.)
Although this appears to be a problem for the reliability of CSDB-integrated systems, the GA scenariois quite different from the air transport market. The ARINC standards are written to allow any manu-facturer to independently produce a compatible LRU. In contrast, the General Aviation ManufacturersAssociation standard states the following in the preface:
This speci cation ... is intended to provide the reader with a basic understanding of the data bus andits usage. (CSDB 1986.)
The systems integrator for all CSDB installations is the Collins General Aviation Division of RockwellInternational. That which is not published in the standard is still standardized and controlled becausethe CSDB is a sole source item.
Deviations from the standard are allowed, however, for cases where there will be no further interfacesto other subsystem elements. When variations are made, the change must rst be approved in a formaldesign review and the product speci cation is then updated accordingly. Integration standards and guide-lines for CSDB include the CSDB standard and EIA RS-422-A by the Electronic Industries Association.
The CSDB connects avionic LRUs point-to-point to provide an asynchronous broadcast method oftransmission. Before the bus was used in the avionic environment, it was put through validation testssimilar to those used on other commercial data buses. These included the environmental tests presented© 2001 by CRC Press LLC
CSDB CSDB 商业标准数据总线( Commercial Standard Digital Bus,以下简称 CSDB 总线) 是由 Rockwell Collins 通用航空电子分部制定的航空电子设备间互连的串行总线标准...
The lightweight DIU-3010 converts Commercial Standard Data Bus (CSDB) digital and analog data from existing air data, AHRS and radio sensors as well as...
substantially modified commercial processes, procedures, practices, and methods....standard MIL-STD-1553, a digital communications bus MIL-STD-1589, JOVIAL ...
digital device, pursuant to part 15 of the FCC...equipment is operated in a commercial environment....standard JBUS/MODBUS functions provided by the ...
臭虫 Byte-Oriented Protocol 面向字节规程 Bus ...台式电脑 Download 下载 Digital camera Digital ...Commercial Building Wiring Standard EIA/TIA 568 ...
臭虫 Byte-Oriented Protocol 面向字节规程 Bus ...台式电脑 Download 下载 Digital camera Digital ...Commercial Building Wiring Standard EIA/TIA 568 ...
Standard of MARK 33 Digital Information Transfer System (DITS) ? The predominant avionics data bus on most high-end commercial and transport aircraft ? ...
Commercial internet exchange Controlled access unit ...bus Diffused IR 漫反射红外线 Distributed ...standard Digital sense multiple access Data ...
臭虫 Byte-Oriented Protocol 面向字节规程 Bus ...台式电脑 Download 下载 Digital camera Digital ...Commercial Building Wiring Standard EIA/TIA 568 ...
Commercial internet exchange Controlled access unit ...bus Diffused IR Distributed coordination function ...standard Digital sense multiple access Data ...
热门文档