第26卷 第12期 2011年12月
Vol. 26No. 12
Journal of Inorganic Materials Dec., 2011
无 机 材 料 学 报
文章编号: 1000-324X(2011)12-1251-05 DOI: 10.3724/SP.J.1077.2011.01251
Na0.5Bi0.5TiO3纳米纤维的制备及形成机理研究
马 晓, 薛丽红, 严有为
(华中科技大学 模具技术国家重点实验室, 武汉 430074)
摘 要: 以Bi(NO3)3 5H2O、板状钛酸(H1.07Ti1.73O4 nH2O)、NaOH为原料, 采用水热法合成了具有钙钛矿结构的场发射扫描电镜(FESEM)、透射电镜(TEM)和X射线能谱仪(EDS)Na0.5Bi0.5TiO3纳米纤维. 利用X射线衍射仪(XRD)、
对产物进行表征. 通过考察在200℃下水热反应不同时间的产物的相结构、微观形貌及化学组成, 对Na0.5Bi0.5TiO3纳米纤维的形成机理进行了探讨. 结果表明: 钛酸H1.07Ti1.73O4 nH2O是一类具有层板结构的化合物, 在水热反应过程中, 板状钛酸的层间H3O+可与Na+、Bi3+进行离子交换, 通过原位生长的方式形成了板状Na0.5Bi0.5TiO3颗粒, 随着水热反应的进行, 板状Na0.5Bi0.5TiO3颗粒裂解形成纳米纤维. 所得的Na0.5Bi0.5TiO3纳米纤维分散性好, 具有钙钛矿结构, 直径为30~150 nm, 长度为几个微米到十几个微米. 关 键 词: 水热合成; 钛酸铋钠; 纳米纤维; 钙钛矿相; 机理 中图分类号: TM22 文献标识码: A
Hydrothermal Synthesis of Bismuth Sodium Titanate Nanowires and Forming Mechanism
MA Xiao, XUE Li-Hong, YAN You-Wei
(State Key Laboratory of Materials Processing and Die Mould Technology, Huazhong University of Science and Technology,
Wuhan 430074, China)
Abstract: The Na0.5Bi0.5TiO3 nanowires with perovskite structure were successfully synthesized by the hydrothermal
method using Bi(NO3)3 5H2O, H1.07Ti1.73O4 nH2O and NaOH as the starting materials. The products were characterized by X-ray powder diffraction (XRD), field emission scanning electron microscope (FESEM), transmission electron mi-croscope (TEM) and energy dispersive spectroscope (EDS), respectively. The phase structure, morphology, and chemical compositions of products synthesized at 200℃ by hydrothermal process for different times were investi-gated and the forming mechanism of nanowires was introduced. The results indicate that H1.07Ti1.73O4 nH2O is a com-pound with lepidocrocite-like layered structure, and the Na+, Bi3+ ions can exchange with H3O+ in the interlay space of plate-like titanates in the hydrothermal process. Then the plate-like titanates are transformed into plate-like Na0.5Bi0.5TiO3 particles by in situ reaction. With the hydrothermal reaction progressing, the plate-like Na0.5Bi0.5TiO3 particles split into nanowires. The nanowires are well dispersed with perovskite structure. The width of nanowire is ranging from 30 nm to 150 nm and the length is about several micrometers to tens of micrometers.
Key words: hydrothermal synthesis; bismuth sodium titanate; nanowires; perovskite; forming mechanism
随着器件向小型化、微型化方向的发展, 纳米
结构材料的合成及应用引起了极大关注[1-2]. 其中
收稿日期: 2010-12-27; 收到修改稿日期: 2011-03-02
基金项目: 国家自然科学基金(51002054); 湖北省自然科学基金(2008CB252); 中央高校基本业务费资助, HUST (2011TS014)
National Natural Science Foundation of China (51002054); Natural Science Foundation of Hubei Province of China (2008CB252); Fundamental Research Funds for the Central Universities, HUST (2011TS014)
作者简介: 马 晓(1987 ), 男, 博士研究生. E-mail: mxhuster@163.com 通讯作者: 薛丽红, 副教授. E-mail: xuelh@mail.hust.edu.cn
(Na0.5Bi0.5)TiO3基无铅压电陶瓷研究进展_IT/计算机_专业资料。综述了(Na0.5Bi0.5Tio3(简写为NBT)基无铅压电陶瓷的发展现状,特性及影响因素,用分子轨道理论...
源于TiCl4的Na0.5Bi0.5TiO3粉体水热合成研究_材料科学_工程科技_专业资料...Wang 等人 用水热合成的氧化锌纳米线 阵列成功制备了压电纳米发电机。而纳米发电...
Pr-doped (1-x)( Na0.5Bi0.5)TiO3-xCaTiO3 ceramics_材料科学_工程科技_专业资料。Photoluminescence and electrical performance of smart material: Pr-doped...
溶胶-凝胶法制备Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3体系无铅压电陶瓷的研究_专业资料。采用溶胶-凝胶法制备(1-x)Na0.5Bi0.5TiO3-xK0.5Bi0.5TiO3体系无铅...
针对纳米纤维制备的静电纺丝技术研究进展王 1, 2 3... 形成类似无纺布状的 纳米纤维毡 Taylor 〔9- 〕 ...无机材料学报, 2010, 9) : 98925( 993. 〔 杜...
2 武汉理工大学材料科学与工程学院, 武汉 430070)【摘 要】 :主要研究了极化电场,极化时间和极 化温度等工艺参数对Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3系无铅...
_TiO_3纳米陶瓷粉体_侯磊_材料科学_工程科技_专业...本课题组成功应用 水热法制备出 Na0.5Bi0.5TiO3...研究表明, Bi2Ti2O7 相是形成钙钛矿相 KBT 的前期...
准同型相界附近(Na1-xKx)0.5Bi0.5TiO3的制备及性能研究_专业资料。利用固相法制备了(Na1-xKx)0.5Bi0.5TiO3系压电陶瓷,XRD分析表明所得陶瓷样品为纯的钙...
溶胶-凝胶-水热法制备Na_(0.5)Bi_(0.5)TiO_3单晶纳米棒的研究_专业资料。采用溶胶-凝胶-水热法在一定条件下合成单晶Na0.5Bi0.5TiO3纳米棒.该方法能够...
陶瓷材料的介电常数-温度曲线显示陶瓷在升温过程...更多>>采用传统陶瓷的制备方法,制备出Sb2O3掺杂的(Na0.84K0.16)0.5Bi0.5TiO3的无铅压电陶瓷。XRD分析...
热门文档