减小盾构刀具磨损,是保证土压平衡盾构长距离掘进的重要措施。砂卵石地层是一种典型的力学不稳定地层,盾构在此种地层条件下掘进,盾构刀具磨损严重。采用最新动态监测装置,对北京地铁四号线四标角门北路站~北京南站区间隧道盾构刀具进行磨损监测,利用最小二乘法对监测数据
第27卷 第2期
岩石力学与工程学报 Vol.27 No.2
2008年2月 Chinese Journal of Rock Mechanics and Engineering Feb.,2008
砂卵石地层盾构刀具动态磨损分析
张明富1,袁大军1,黄清飞1,黄常波2,张 峰2
(1. 北京交通大学 隧道及地下工程教育部工程研究中心,北京 100044; 2. 中国建筑一局集团有限公司,北京 100073)
摘要:减小盾构刀具磨损,是保证土压平衡盾构长距离掘进的重要措施。砂卵石地层是一种典型的力学不稳定地层,盾构在此种地层条件下掘进,盾构刀具磨损严重。采用最新动态监测装置,对北京地铁四号线四标角门北路站~北京南站区间隧道盾构刀具进行磨损监测,利用最小二乘法对监测数据进行回归分析。以刀具磨损系数为因变量,以千斤顶掘进速度v、千斤顶推力F、刀盘转速n以及刀盘扭矩T等掘进参数为自变量分别建立回归表达式,在此基础上提出掘进参数的合理选择范围,并建立刀具磨损量与掘进距离的拟合表达式,为工程实际中减小刀具磨损及预测盾构在类似地层条件下的最长掘进距离等提供理论依据。研究结论对于类似地质条件下盾构选型和实际施工有一定的指导价值。
关键词:隧道工程;盾构隧道;切削刀具;磨损系数;磨损量;掘进参数
中图分类号:U 45 文献标识码:A 文章编号:1000–6915(2008)02–397–06
ANALYSIS OF DYNAMIC ABRASION OF SHIELD CUTTERS IN SANDY
COBBLE STRATUM
ZHANG Mingfu1,YUAN Dajun1,HUANG Qingfei1,HUANG Changbo2,ZHANG Feng2
(1. Tunnel and Underground Engineering Research Center of Ministry of Education,Beijing Jiaotong University, Beijing 100044,China; 2. China Construction First Building Corporation Limited,Beijing 100073,China)
Abstract:The main types of shield machines used recently in tunnel construction are earth pressure balance(EPB) shield tunneling and slurry shield tunneling. In order to reduce shield cutters wear,the parameter in shield construction advancing should be rational. This is fundamentally critical to ensure the shield to advance distantly in sandy cobble stratum. Sandy cobble is a typically unstable stratum and its mechanical properties are unfavorable for force transitivity and spread. Sandy cobble is also of unfavorable plasticity and fluidity,which will bring serious abrasion to shield cutters. By employing the latest dynamic supervisory gear,the abrasion of shield cutters used in shield tunnel section of Jiaomen Northern Load station to Beijing Southern station of Beijing metro line 4 was monitored;and the monitoring data were analyzed with the least square method. With abrasion coefficient as dependent variable,and advancement rate,total thrust,cutter-head rotation speed and cutter torque as independent variables,four regression expressions were established and eight regression graphs were drawn. Based on the regression expressions and graphs,the rational range of advancing parameters was proposed;and the fitting expression of abrasion of shield cutters to advancing distance was established,which may provide theoretical basis for reducing cutter abrasion in practical engineering,and for estimating the longest advancement distance in similar stratum. Based on the fitting expression of abrasion of shield cutters to tunnel advancing,the longest advancement distance is found to be 1.84 km in this stratum. The research conclusion is helpful for shield selection and engineering construction with similar geotechnical conditions.
收稿日期:2007–06–05;修回日期:2007–09–26
作者简介:张明富(1981–),男,2005年毕业于南京林业大学土木工程学院土木工程专业,现为硕士研究生,主要从事盾构隧道方面的研究工作。E-mail:zhangmingfu19@126.com
砂卵石地层盾构刀具磨损测试分析_机械/仪表_工程科技_专业资料。盾构刀具城市轨道交通究 研 2009 年 砂卵石地层盾构刀具磨损测试分析袁大军1 胡显鹏2 李兴高1 3...
砂卵石地层盾构刀具动态... 6人阅读 6页 2...区间无水砂卵石地...无水砂卵石地层盾构刀具磨损状态和规律的技术研究 ...
无水砂卵石地层盾构刀具磨损状态和规律_冶金/矿山/地质_工程科技_专业资料。无水砂卵石地层盾构刀具磨损状态和规律 摘要: 本文介绍了北京地铁十号线二期 17 标...
砂卵石地层盾构机刀盘磨耗分析及措施 摘要:减小盾构机刀具磨损是保证盾构机能够长距离掘进的重要措施,对于砂卵石地层该项工作尤其受 到重视。本文以北京地铁 10 ...
北京砂卵石地层盾构机刀盘磨耗分析及工程措施_专业资料。减小盾构机刀具磨损是保证盾构机能够长距离掘进的重要措施,对于砂卵石地层该项工作尤其受到重视。本文以北京...
砂卵石地层盾构掘进的刀具磨损和改善措施_建筑/土木_工程科技_专业资料。第期0...经 分析 ,原 因为 : 泥水 加压 平衡 式盾 其① 构机 的齿刀 比较 小, ...
手段从机械与土壤两方面入手,对北京砂 卵石地层土压平衡盾构掘进刀具磨损的问题进行了研究,取得了下列研究成果: (1)系统分析了各种刀具的工作原理,及其磨损原因和...
富水砂卵石地层大直径盾构刀具的磨损与适应性_交通运输_工程科技_专业资料 暂无评价
富水砂卵石地层盾构换刀方案_专业资料。成都地铁1号线盾构隧道工程主要穿越地层为砂卵石地层,砂卵石对盾构机的刀具磨损较为严重,为保证盾构掘进的正常进行,需要...
热门文档