SAE AMS 4324-2002 固溶热处理的、消除应力的和过老化的(7055-T74511)含8.0Zn-2.3Cu-2.0Mg-0.16Zr挤压的铝
AEROSPACE MATERIAL
SPECIFICATION
AMS 4324
IssuedReaffirmed
AUG 2002APR 2007
Aluminum Alloy, Extruded Rod, Bar and Profiles (7055-T74511)
8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr
Solution Heat Treated, Stress-Relieved, and Overaged
(Composition similar to UNS A97055)
RATIONALE
This document has been reaffirmed to comply with the SAE 5-year Review policy.
1.SCOPE:1.1
Form:
This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles (shapes) produced with a cross sectional area of 24 square inches (155 cm2) maximum and a circumscribing circle diameter (circle size) of 10.5 inches (267 mm) maximum. See 8.3 for a definition of circumscribing circle diameter.1.2
Application:
These extrusions have been used typically for machined parts requiring a combination of high
mechanical properties and good resistance to exfoliation corrosion, but usage is not limited to such applications.
2.APPLICABLE DOCUMENTS:
The issue of the following documents in effect on the date of the purchase order forms a part of this specification to the extent specified herein. The supplier may work to a subsequent revision of a document unless a specific document issue is specified. When the referenced document has been cancelled and no superseding document has been specified, the last published issue of that document shall apply.
SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright © 2007 SAE International
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER:
Tel: 877-606-7323 (inside USA and Canada)Tel: 724-776-4970 (outside USA)


02-SAE AMS 2750D 中文_冶金/矿山/地质_工程科技_专业资料。02-SAE AMS ... SAE AMS 4324-2002 固溶... 7页 免费 SAE AMS 5786E-2002 含6... 6...
热门文档