Design automation for analog/mixed-signal (A/MS) circuits and systems is still lagging behind compared to what has been reached in the digital area. As System-on-Chip (SoC) designs include analog components in most cases, these analog parts become even mor
From System Specification To Layout:
Seamless Top-Down Design Methods for Analog and Mixed-Signal Applications
R. Sommer1, I. Rugen-Herzig1, E. Hennig1, U. Gatti2, P. Malcovati3, F. Maloberti3,
K. Einwich4, C. Clauss4, P. Schwarz4 , G. Noessing5
1
Infineon Technologies AG – Germany2
Siemens ICN – Italy3, University of Pavia – Italy4
FhG IIS – Germany, 5Infineon Technologies AG – Austria
Abstract
Design automation for analog/mixed-signal (A/MS) cir-cuits and systems is still lagging behind compared to whathas been reached in the digital area. As System-on-Chip(SoC) designs include analog components in most cases,these analog parts become even more a bottleneck in theoverall design process. The paper is dedicated to latestR&D activities within the MEDEA+ project ANASTASIA+.Main focus will be the development of seamless top-downdesign methods for integrated analog and mixed-signal sys-tems and to achieve a high level of automation and reuse inthe A/MS design process. These efforts are motivated by theurgent need to close the current gap in the industrial designflow between system specification and design on the onehand and block-level circuit design on the other hand. Thepaper will focus on three subtopics starting with the top-down design flow with applications from circuit sizing, de-sign centering, and automated behavioral modeling. Thenext part focuses on modeling and simulation of specificfunctionalities in sigma-delta design while the last sectionis dedicated to a mixed-signal System-on-Chip design envi-ronment.
which are in the focus of the ANASTASIA+ project are pre-sented. At first, a top-down design flow with applicationsfrom circuit sizing, design centering, automated behavioralmodeling, and automated layout generation will be de-scribed. Following, modeling and simulation of specificfunctionalities for Σ design will be demonstrated. Thethird topic will cover a mixed-signal System-on-Chip de-sign environment.
2. Top-Down Design
2.1.Overview of the analog top-down design flow
1. Introduction
Electronic Design Automation (EDA) is a key factor for fastand efficient development of complex mixed-signal/mixed-domain systems. The ultimate goal of EDA is to provide acomprehensive top-down design method with secured con-straint propagation between all design steps from systemdefinition down to integrated-circuit mask generation. Inthis respect, the techniques and tools that are available to-day for the design of analog and mixed-signal componentsare lagging considerably behind the ones from the digitaldomain. Therefore, as soon as a system includes some ana-log functions, EDA efficiency and comprehensiveness aredramatically reduced. In the following sections three topics
Figure 1: Top-down mixed-signal design-flow incorporating bottom-up knowledge and backannotation of low-level effectsFig.1 gives an overview of the analog part of the top-downdesign and refinement process which is addressed by theANASTASIA+ project. Starting with the system-level de-sign, the specifications and interfaces of the next refinementstep will be derived. Here, some bottom-up knowledge hasto be brought in since the different blocks will have to be re-

design approach, the system specifications are ... a device layout can then be generated from ...For these systems, other optical methods, such ...
design approach, the system specifications are ... a device layout can then be generated from ...For these systems, other optical methods, such ...
热门文档