罗技测试标准
To provide a general inspection criteria for plastic case which is to be use in Logitech Manufacturing
and Quality Assurance department. For painting and other special surface treatment requirement, please refer to individual inspection instruction.此文件为在罗技工厂和质量保证部门的塑胶箱提供一个通用的检验标准。对于喷涂和其他特殊表面的要求,请参照其相应检验规范。
2.1 This document addresses Logitech Business System element:
12 - Inspection & Test Status
2.2 This document applies to the following Logitech Site(s):
SZ - Suzhou TW - Hsinchu
3.1 Maintenance and/or implementation of this document is performed by:
Quality (Site)
3.2 This document is maintained and updated by Quality Assurance Department
4.1 Documents referenced by this document.
Doc ID - (click to access) Document Title
WWP-750338-0000
Color Matching Procedure
Doc Status
Active
4.2 Notes Databases (located on the local file server at each site.)
Database Title FileName - (click to access)
- None -
- None -
5.1 Natural or artificial light in illumination of 800-1500 lux overhead, inspection surface held at 45.0 angle to the inspector
自然光源或人工光源,亮度. 800-1500 lux。检验员以与其45度角进行检验。
5.2 Inspection distance of 450 -550 mm(18-22 inches).检验距离:450 -550 mm(18-22 英寸). 5.3 Inspection time :检验时间
A Surface : 10 secs/surface A面:10秒 B Surface : 5 secs/surface B面:5秒
A Surface : all of the surface are visible by the end-user in general use. A面:使用者在通常使用时可视的面 For Example- top surface and front surface of top case.例如:箱体的顶部面或正面 B Surface : all of the surface are not visible by the end-user in general use. B面:使用者在通常使用时不可视的面
For Example- bottom surface and side surface of bottom case 例如:底面和侧面
5.4 Forbidden to inspect a part by reflection of light to accent a possible surface flaw.禁止将部件通过不同角度反射光源去刻意地寻找可能存在的流痕。
5.5 Magnification shall never be used for the cosmetic inspection of plastic parts, except customer's special assignment or requirement. 不可将塑胶件放大去进行检验,除非客户有特殊的要求。 5.6 Sampling plan:抽取计划:
The purpose of the procedure is to define a First Article Inspection Audit and Out of Box Audit (OOBA) process and criteria for all Logitech's "8 ...
standard reliability tests for new painted finish ...Logitech Case Inspection Instruction Inspection Instr...DEVICES. 5.3.5.2 For ORT, refer to GOI-...
standard reliability tests for new painted finish ...Logitech Case Inspection Instruction Inspection Instr...DEVICES. 5.3.5.2 For ORT, refer to GOI-...
热门文档