ADI ADE7878高精度三相电表方案
ADI 公司的ADE7878是高精度三相电能测量IC,集成了串行接口和三个灵活的脉冲输出,包括有二阶Delta-Sigma ADC,数字积分器,基准电路,以及进行总的有功,无功和表观能量测量以RMS计算所需要的所有信号处理.采用固定功能的DSP来实现这些信号处理. ADE7878具有精度高,支持EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22 and IEC 62053-23,和三相三线或四线制兼容,测量误差小于0.1%, 工作电压在2.4 到 3.7V.本文介绍ADE7878主要特性,功能方框图, 总的有功和无功与表观电量累加框图,以及评估板EVAL-ADE7878EB主要特性,方框图, 电路图和材料清单BOM.
The ADE7878 is a high accuracy, 3-phase electrical energy measurement IC with serial interfaces and three flexible pulse outputs. The ADE7878 incorporates second-order Σ-Δ ADCs, a digital integrator, reference circuitry, and all the signal processing required to perform total (fundamental and harmonic) active, reactive and apparent energy measurement, fundamental only active and reactive energy measurement and rms calculations. A fixed function digital signal processor (DSP) executes this signal processing.
TheADE7878 is suitable to measure active, reactive, and apparent energy in various 3-phase configurations, such as WYE or DELTA services, with both three and four wires. The ADE7878 provides system calibration features for each phase, that is, rms offset correction, phase calibration, and gain calibration. The CF1, CF2 and CF3 logic outputs provide a wide choice of power information: total/fundamental active/reactive power, total apparent power or sum of current rms values.
The ADE7878 has waveform sample registers that allow access to all ADC outputs. The device also incorporates power quality measurements such as short duration low or high voltage detections, short duration high current variations, line voltage period measurement and angles between phase voltages and currents. Two serial interfaces can be used to communicate with the ADE7878: SPI or I2C while a dedicated high speed interface, HSDC (High Speed Data Capture) port, can be used in conjunction with I2C to provide access to the ADC outputs and real time power information. The ADE7878 has also two
interrupt request pins, IRQ0 and IRQ1 , to indicate that an enabled interrupt event has occurred.
Three specially designed low power modes ensure the continuity of the energy accumulation when the ADE7878 is in tampering situation.
The ADE7878 is available in 40-lead LFCSP lead free package.
ADE7878主要特性:
Highly accurate; supports EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22 and IEC
本设计采用 ADI 公司的高精度、三相电能测量芯片 ADE7878 进行电能计量,包括有功、无 功和视在电能的计量。实现了电压、电流有效值测量,功率因数测量,以及电压跌落...
基准电压源典型漂移量为 ADE7880为高精度3相电能计量IC,采用自适应实时监控(...ADE7880与常见的ADE7878、ADE7868、ADE7858和ADE7854三相电 能计量IC引脚兼容。...
40° 至+85°C 2 灵活的I C, SPI和HSDC串行接口 应用电能测量系统 通用描述 ADE7878 是一个高精度,三相电子式电能测量 IC, 具有串行接口和灵活的脉冲输出。...
f/Hz Ua/V Ub/V Uc/V Ia/A Ib/A Ic/A P/W cosф 50.500 57.737...基于ADE7878芯片的谐波电... 9页 免费 ADE7878高精度三相电能测... 9页 免费...
近七天成交量:14088份 进入机构主页 0.0分 (0人评价)暂无用户评价 我要评价...四款高精度电能计量IC ADE7878、ADE7868、ADE7858及ADE7854可用于提高商业、工业...
ADE7878笔记_计算机硬件及网络_IT/计算机_专业资料。电表测量芯片笔记基本功能 ADE7878是美国ADI公司推出的三相高精度多功能电能计量芯片,超越了工业 上对电能计量0....
其中, ADE7878是美国ADI公司推出的三相高精度多功能电能计量芯片, 超越第2页 ...三相四线以及其他接线的多功能测量IC, 带有二路独立的中断申请输出口, 三路独立...
ADI公司于2009年12月4日宣布最新推出四款高精度电能计量IC——ADE7878、ADE7868...ADI公司推出新电能计量I... 15人阅读 1页 0.50 低功耗的三相电能计量IC...
三相多功能电能计量IC ADE7854/ADE7858/ADE7868/ADE7878 特性高精度;支持EN 50470-1、EN 50470-3、IEC 62053-21、 IEC 62053-22和IEC 62053-23标准 兼容三相...
ADE7878官方中文手册_电子/电路_工程科技_专业资料。ADE7878中文手册三相多功能电能计量IC ADE7854/ADE7858/ADE7868/ADE7878 特性高精度;支持EN 50470-1、EN 50470...
热门文档