into bending strains and in-plane strains, the deformation of the MPPF can be modeled by the elasto–plastic deformation of a thick plate. Considering that the finite element model is an efficient method to compute the springback shape, an elasto-plastic shell element capable of large strain and large deformation is adopted. The present method used to compensate for springback involves offsetting the strokes of the pressing punches according to the difference between the desired and the predicted-springback plate. The final strokes can be determined once the error between the designed and predicted shapes converges to a specified tolerance through a number of finite element computations.
3.1. Finite element model
Various investigations have reported that springback is a complex problem which involves plastic strain. Therefore, to accurately model the problem it is preferable to use appropriate models that are capable of describing material behavior such as the Bauschinger effect. The finite element method is a successful way to model the plastic deformation of the multi-point forming procedure. The commercial program ANSYS was used to simulate deformation under various piston stokes. The major conditions of the finite element analysis are given as follows: The materials were defined as isotropic and homogenous.
The kinematic hardening model with the Bauschinger effect was used for strain hardening. The thermal effects and friction effects were neglected.
The kinematic hardening rule representing the rigid motion of the yield surface during loading was used, as shown in Fig. 6. It is capable of simulating the load–displacement response, including the Bauschinger effect. The finite element chosen was SHELL181, a plastic-shell
Process design for multi... 暂无评价 6页 2.00元 Method of closed loop... Springback adjustment fo... 暂无评价 13页 免费 Enhancement of Increment.....
Multicore Bundle Adjustment-Manual_计算机软件及应用_IT/计算机_专业资料。三维计算机视觉匹配相关资料Multicore Bundle Adjustment Manual Changchang Wu University of...
Multi--scale Approach for CFRP Composite Simulation by JSTAMP-NV and DIGIMAT_材料科学_工程科技_专业资料。Multi-scale Approach for CFRP Composite Simulation...
for sheet metal part, multi-point forming (MPF) technology is discussed in...3.1 Element group design and shape adjusting mode Height adjustment for ...
216-219. ON MULTI-IMAGE RECONSTRUCTION FROM HISTORIC PHOTOGRAPHS I. ...Multi-image Adjustment of Historic Images of Unknown Orientation with the ...
However, there are no analytical models for variation analysis in multi-station compliant assembly systems. It is critical to develop realistic models for ...
Similar to freeways except inclusion of a few different adjustment factors to determine FFS ? Base conditions for multi-lane highways: – 12’ lanes – ...
Site design plane adjustment work is heavy, if modify the design elevation,...In modern construction engineering, general multi-storey buildings when the ...
热门文档