This paper presents the application of experimental design in optimization of project cost through minimization of dimensions of cross section of reinforced concrete beam. The methods used here are recommended for external variables optimization. In the ca
6th World Congresses of Structural and Multidisciplinary OptimizationRio de Janeiro, 30 May - 03 June 2005, Brazil
OPTIMIZATION OF CROSS SECTION OF REINFORCED CONCRETE BEAM USING
EXPERIMENTAL DESIGN
ANA LÚCIA H. C. EL DEBS1, ANSELMO CHAVES NETO23,
ROBERTO MAURO FÉLIX SQUARCIO4, SACHIKO ARAKI LIRA
(1) Universidade de São Paulo
Escola de Engenharia de São Carlos
Av. Trabalhador Sãocarlense, 400 - Cep: 13566-590 - São Carlos (SP) – Brazil
analucia@sc.usp.br
(2) PPGMNE/DEST - UFPR
Centro Politécnico – Caixa Postal 19081 – CEP 81531-990 – Curitiba (PR) - Brazil
anselmo@est.ufpr.br
(3) Universidade de São Paulo
Escola de Engenharia de São Carlos
Av.Trabalhador Sãocarlense, 400 - Cep: 13566-590 - São Carlos (SP) – Brazil
isabella@sc.usp.br
(4) PPGMNE/CESEC – UFPR
Centro Politécnico – Caixa Postal 19081 – CEP 81531-990 – Curitiba (PR) - Brazil
roberto@cefetpr.br
(5) PPGMNE/IPARDES
Rua Máximo João Kopp, 274 - Bloco 2 - Santa Cândida – CEP 82630-900 - Curitiba (PR) - Brazil
sachiko@onda.com.br
1. ABSTRACT
This paper presents the application of experimental design in optimization of project cost through minimization of dimensions of cross section of reinforced concrete beam.
The methods used here are recommended for external variables optimization. In the case of cross section of beam, the external variables are the geometric dimensions of the structure and the properties of the material.
Three methods of experimental design were used: One-side Gradient Design I, One-side Gradient Design II and Central Gradient Design. After the application of these methods the minimum cost of cross section of beam was gotten. The comparison between the methods was made through mean square deviations.
These methods make possible the cost optimization of cross section of beam by the simple way, not using sophisticated computational programs. The algorithm used is also simple, not spending great computational effort.
Hence, the experimental design can be applied with great success in the optimization of reinforced concrete structures, being a simple and versatile approach, being able also to be used for different structures, considering all the practical requirements.
2. KEY WORDS: Experimental Design, Optimization, Reinforced Concrete, Beam.
3. INTRODUCTION
This work presents the application of experimental design in optimization of project cost through minimization of dimensions of cross section of reinforced concrete beam.
The methods used here, presented by KRAKOVISKI [1], are recommended for external variables optimization that are related with general characteristics of the structure, the cross section of the concrete and the materials.
In the external variables optimization the objective function as well as constraints are composed only by external variables. In the case of cross section of beam, the external variables are the geometric dimensions of the structure and the properties of the material. The objective function, which is the cost function of the cross section of beam, is given the according with VIANNA
[2] by:
F(x)=(b×h)×Cc+(As×ρs)×Cs+(b+2h)×Cf (1)
where:
b is the width of cross section of beam;
h is the height of cross section of beam;
AS is the steel area;
ρS is the specific mass of the steel;
CS is the cost of the steel, for unit of mass;
CC is the cost of the concrete, for unit of volume;
CF is the cost of the mold, for unit of area.
OPTIMIZATION OF CRO... 暂无评价 5页 免费 Cross...cross-section failure of reinforced concrete beam ...Experimental purposes To understand the failure ...
Shear Capacity of Reinforced Concrete Beams Using_...EXPERIMENTAL PROGRAM A brief summary of the ...B-B t I 7" I Cross section for beams ...
of concrete beam–column connections reinforced with...through a comprehensive experimental work, investigates...cross section, the strains were assumed to vary ...
of experimental data available in the literature. ...reinforced concrete cross section to ensure ductile...is computed using the following equilibrium equation...
OF REINFORCED CONCRETE STRUCTURES USING ANSYS ...simplified procedures based on experimental data. Although...amount of steel in the cross section of the ...
considering the use and management requirements for the optimization of the ...Beam cross section of reinforced concrete composite beams and transverse bent ...
Experimental Study on Reinforced Concrete Beam andComposite...of cross section 200 mm x 200 mm The column ...using linear variable displacement transducer (LVD...
2. EXPERIMENTAL DETAILS 2.1. Specimens Three rectangular reinforced concrete beams of 915 mm span and 102 mm height x 51 mm width cross-section were ...
In such a reinforced concrete beam, the tension ...This is achieved by using deformed bars with ...cross-section of the member does not warp [wC:...
NONLINEAR ANALYSIS OF REINFORCED CONCRETE THIN-WALLED...OF THIN-WALLED BEAM WITH OPEN CROSSSECTION 2.1...(‘t) are determined from experimental creep data...
热门文档