塑胶齿轮知识
DSM’s Stanyl® as an excellent gear material for demanding
applications
Dr. H.K. van Dijk, DSM Engineering Plastics, P.O. Box 604, 6160 AP
Geleen, The Netherlands, Dr. Ir. H.G.H. van Melick, DSM Research,
Material Science Centre, P.O. Box 18, 6160 MD Geleen, The
Netherlands, J. Koenen, DSM Engineering Plastics, P.O. Box 604,
6160 AP Geleen, The Netherlands
Abstract
DSM’s Stanyl is an excellent material for gears in demanding applications with respect to torques to be transmitted and operating temperatures.
Stanyl, a polyamide 46, has a crystallinity of 70%, which results in very good wear and friction properties and an excellent retention of mechanical properties (strength, stiffness) at elevated temperatures. The material allows for very fast cycle times with water-cooled moulds.
The higher retention of mechanical properties at elevated temperatures (> 100 C) allows smaller gears to be designed compared to PA66 or PPA’s, while still transmitting the same torque. Stanyl’s superior mechanical properties at high T compared to PA66 and PPA’s can be increased further by annealing the molded parts. Annealing is a high temperature treatment of a molded part. The result is a further 50% increase in the stiffness and strength of Stanyl at temperatures above the glass transition temperature. A secondary benefit of annealing is that the water uptake of Stanyl can be reduced to the level found with PPA’s. Annealing to reduce moisture uptake is unique for Stanyl. The annealing effect is irreversible and is accompanied by an increase in the material’s molecular weight. Additional benefits of annealing are an increase in fatigue resistance and a further improvement of the materials wear and friction performance.
DSM has extensively modeled the annealing of Stanyl. Predictions on time and temperature needed to reach a desired effect and the effect on part shrinkage can be made and a cost model is available.
1
to produce the highest quality parts for the most extreme applications. US...图 9AERO GEAR 的镀膜齿轮产品 Praxair Surface 公司是全球领先的供应商,在材料...
Plastic gear selection for the application begins ...An alternative is to use plastic gears. Three ...demanding applications, such as small household ...
for new generation airframes: a review Lin Ye a...ectiveness in accommodating the highly demanding ...applications, serving as an attractive candidate to...
for new generation airframes: a review Lin Ye a...ectiveness in accommodating the highly demanding ...applications, serving as an attractive candidate to...
热门文档