功率半导体器件基本原理是功率半导体器件的经典著作, 共十章
174 FUNDAMENTALS OF POWER SEMICONDUCTOR DEVICES
JS=AT2e (qΦBN/kT)
and the total series-specific resistance is given by
(4.9)
RS,SP=RD,SP+RSUB+RCONT. (4.10)
The saturation current is a strong function of the Schottky barrier height and the temperature as shown in Fig. 4.6 for silicon devices. (A corresponding plot for 4H-SiC is provided in reference 3 for the range of barrier heights typical for this material.) The barrier heights chosen for this plot are in the range for typical metal contacts with silicon. The saturation current density increases with increasing temperature and reduction of the barrier height. This has an influence not only on the on-state voltage drop but also on an even greater impact on the reverse leakage current as discussed in Sect. 4.4. As discussed in Chap. 1, the specific on-resistance of the drift region is given by
Ron-ideal
4BV2=. 3εSμnEC
(4.11)
The specific on-resistance of the drift region for 4H-SiC is approximately 2,000 times smaller than for silicon devices for the same breakdown voltage as shown earlier in Fig. 3.6. Their values are given by
RD,SP=Ron-ideal(Si)=5.93×10 9BV2.5
and
(4.12)
RD,SP=Ron-ideal(4H-SiC)=2.97×10 12BV2.5. (4.13)
In addition, it is important to include the resistance associated with the thick, highly doped N+ substrate because this is comparable with that for the drift region in some instances. The specific resistance of the N+ substrate can be deter-mined by taking the product of its resistivity and thickness. For silicon, N+ substrates with resistivity of 1 mΩ cm are available. If the thickness of the substrate is 200 μm, the specific resistance contributed by the N+ substrate is 2 × 10 5 Ω cm2. For silicon carbide, the available resistivity of the N+ substrates is substantially larger. For the available substrates with a typical resistivity of 0.02 Ω cm and
42
thickness of 200 μm, the substrate contribution is 4 × 10 Ω cm. The specific
+
resistance of the ohmic contact to the N substrate can be reduced to less than 1 × 10 6 Ω cm2 with adequate attention to increasing the doping concentration at the contact and by using ohmic contact metals with low barrier heights as discussed in Sect. 2.4. The calculated forward conduction characteristics for silicon Schottky rectifiers are shown in Fig. 4.7 for various breakdown voltages. For this figure, a Schottky barrier height of 0.7 eV was chosen because this is a typical value used in
J. Baliga 功率半导体器件基本原理是功率半导体器件的经典著作, 共十章J. Baliga...4 that their on-state voltage drop becomes large when the device is ...
功率半导体器件工作原理_机械/仪表_工程科技_专业资料。功率半导体器件工作原理电力...功率半导体器件基本原理... 22页 免费 第2章 功率半导体器件复... 4页 免...
75页 4下载券 功率半导体器件基本原理... 76页 2下载券喜欢此文档的还喜欢 ...Power Electronics:Converters, Applications and Design tongyibin 第2章 半导体...
功率半导体器件基本原理... 76页 4下载券 第2章半导体器件基本原理... 40页...tongyibin 1、半导体的基本知识容易导电的物质称为导体,金属是最常见的导体。 ...
第一章 功率半导体器件_信息与通信_工程科技_专业资料...图1-4 大功率二极管的开通过程 图1-5 大功率...( ) 1.4.1 结构从工作原理和基本特性上看, 大...
图1-4 大功率二极管的开通过程 (2)大功率二极管的关断过程 图1-5为大功率...功率半导体器件基本原理... 22页 免费 宽禁带功率半导体器件技... 5页 免费...
电子系统设计概论 第一讲 功率半导体器件原理 及其应用电子系统集成研究所高明煜...? ? 4.1 功率场效应晶体管结构特点 4.2 功率MOSFET的基本特性 4.3 主要...
P-i-n整流器件,双极功率器件,功率MOSFET, 晶闸管类器件,双极-MOS功率器件 ?...功率半导体器件基本原理... 228页 2下载券 第2章 功率半导体器件复... 4页...
第二章 功率半导体器件的驱动与保护 2.1 2.1.1 晶闸管的触发电路晶闸管...图2-14 KC04集成触发器电原理图 5.数字触发器 . 为了提高触发脉冲的对称度,...
4 3 1 2 1 1 CH2--功率半导体器件 授课目的 1、理解二极管、晶闸管、MOSFET、IGBT、IPM和 IGCT等常用功率半导体器件的动态开关性能; 2、掌握功率半导体...
热门文档