Composite
ELSEVIER
PII:
SO266-3538(97)00067-S
Science and Technology 57 (1997) 1369-1379 0 1997 Elsevier Science Limited Printed in Northern Ireland. All rights reserved 0266-3538/97/$17.00
HIGH-VELOCITY IMPACT OF GRAPHITE/EPOXY COMPOSITE LAMINATES J. K. Chen,” Firooz A. Allahdadi”& Theodore C. Carneyb* a Satellite Assessment Division, Phillips Laboratory, Kirtland AFB, New Mexico 87117-5776, USA b Applied Research Associates Inc., Albuquerque, New Mexico 87110, USA
(Received 10 June 1996; revised 18 February 1997; accepted 28 February 1997)
Abstract The smoothed particle hydrodynamics (SPH) technique in conjunction with the macro-homogeneous, anisotropic material concept for fiber composites has been proposed for the simulation of impact damage and penetration of composite structures. To describe material behavior under high-intensity loadings, a 3-D anisotropic elasto-plasticity constitutive model, an equation of state, and a failure criterion for unidirectional composites have been developed. Furthermore, in order to maintain material frame indifference of the constitutive equations, the polar stress rate approach was employed in the stress and strain transformations for large rotations. The above physics were incorporated into the SPH..Detailed penetration process and damage progression were simulated with graphite/epoxy laminates impacted by a steel projectile. The predicted impact response and damage patterns agree fairly well qualitatively with experimental results. This study has demonstrated that SPH can be a robust and viable analytical tool for predicting the response of fiberreinforced composite structures subjected to highvelocity impact. 0 1997 Elsevier Science Limited
composite; smoothed age; macromechanics Keywords:
penetration; particle
progressive damhydrodynamics;
1 INTRODUCTION Impact penetration of composite structures has received considerable attention in the last decade.’ The physical phenomena occurring in high-velocity impact on composite laminates are complex. They include bending, local contact, bulging, matrix cracking, fiber breakage, delamination, fragmentation, etc. Therefore, most investigations of this problem have * Present address: EMRTC, New Mexico Tech, Socorro, New Mexico 87801, USA. 1369
focussed on either the determination of ballistic limits and residual velocities of a projectile on composite targets or experimental observation of deformation and damage. Recently, Chen et al.’ have applied the smoothed particle hydrodynamocs (SPH) technique to simulate the detailed perforation process for B/Al composites. Since the diameter of boron fibers is relatively large, as compared to the lamina thickness, they modeled the fibers and matrix as two different isotropic materials. This approach, however, is prohibitively computer memory intensive for graphite/epoxy (Gr/Ep) composites because there is a great number of fibers over a lamina. The new challenges posed by modeling the inhomogeneity an
d anisotropy of fiber-reinforced composites are two-fold. One is how to describe accurately the anisotropic elasto-plasticity, equation of state (EOS), and failure conditions for a unidirectional composite under high strain-rate loadings. The other is how to feasibly implement a composite structure model in a numerical code simulation while considering limitations of computer memory and time. In this paper a macromechanics approach for fiber composites is proposed for SPH simulations of impact penetration into Gr/Ep composites. A 3-D elastoplasticity constitutive model, an EOS, and a failure criterion which account for the anisotropic behaviors of fiber composites were developed. Since materials often undergo large rotation during impact, stress and strain transformations between the principal material axes and the deformed configurations were also considered based on the polar stress rate approach. The above modules for fiber composites were incorporated into the SPH. 3-D numerical simulations were carried out with the[O/90/45/ - 451s and[45/ - 45/O/90], Gr/Ep composite laminates impacted by a steel cubic projectile. The impact velocities exceeding the ballistic limits were of interest. Detailed results and comparison with the experimental data will be presented and discussed. Further development needs will also be addressed.































Acoustic emission waveforms in composite laminates under low velocity impact ... impact damage initiates at the location of high contact stresses, usually ...
at high 45J: m=2.3kg, (typically at impact energy V= 6.25m SC’)...threedimensional modeling of low velocity impact damage in composite laminates....
Stacking-sequence-blending-of-multiple-composite-laminates_工程科技_专业资料。... thus, is usually applied with a high probability between 0.7 and 1.0....
Vlot [9] conducted static indentation and low and high velocity impact ...Low-velocity impact analysis of composite laminates using linearized contact ...
low-velocity impact properties of_电子/电路_工程...of the composite laminates is considerably reduced....high temperature in either HGFs or thermoplastic ...
Progressive damage modeling of open-hole composite laminates under compression_材料科学_工程科技_专业资料。今日推荐 180份文档 ...
modelling of damage induced by low-velocity impact on composite laminates D.... marine and wind turbine sectors – because of their high strength and ...
Low velocity impact and ... 8页 2财富值...SL-ES30 glass-cloth/epoxy laminates having high ...The failure modes of composite materials are a?...
laminates subjected to a low velocity impact (1)_英语学习_外语学习_教育...[19] and Zhou and Chen [20] to simulate swirling gas-particle flows ...
热门文档