BS 1768-1963 统一精密六角螺栓、螺钉和螺母(UNC与UNF螺纹)规范

BS1768:1963
Foreword
This standard makes reference to the following British Standards:BS 18, Methods for tensile testing of metals.
BS 131, Methods for notched bar tests — Part 1: The Izod impact test on metals. BS 240, Methods of Brinell hardness test — Part 1: Testing of metals. BS 860, Table of approximate comparison of hardness scales.
BS 919, Screw gauge limits and tolerances — Part 1: Gauges for screw threads of Unified form.
BS 969, Plain limit gauges: Limits and tolerances.
BS 970, Specification for wrought steels for mechanical and allied engineering purposes — Part 1: General inspection and testing procedures and specific requirement for carbon, carbon manganese, alloy and stainless steels. BS 1574, Split cotter pins.
BS 1580, Unified screw threads — Parts 1 and 2: Diameters 1/4 in and larger. BS 3111, Specification for steel wire for cold forged fasteners and similar components — Part 1: Carbon and low alloy steel.
When BS 1768 was first issued in 1951, its publication marked an important stage in the development of the Unified screw thread system established in accordance with the agreement reached by the United Kingdom with the
UnitedStates and Canada at the Ottawa Conference of 1945 and ratified by the Declaration of Accord signed by representatives of those three countries in November, 1948.
It was recognized at that time that effective adoption of the system depended very largely on the provision of commonly used types and sizes of fasteners, the
general features of which would be unified as well as the threads. As a first step, two standards for hexagon bolts, screws and nuts were published: BS 1768 for the Unified precision normal series, and BS 1769 for the Unified black heavy series.BS 1768 was restricted at that time to sizes up to and including 1 inch but the many requests received for an extension of the standard have long indicated that this range was inadequate for the needs of industry and this edition accordingly provides for sizes up to and including 2 inches.
It should be mentioned that this extension of the Unified range is also in
accordance with agreement reached with the U.S.A. and Canada at a further ABC Conference held in Ottawa in June, 1960, and that an ISO Recommendation now in course of preparation for hexagon bolts, screws and nuts will include the range of Unified normal hexagons for nominal sizes up to 11/2 inches.
In revising the standard, the opportunity has been taken to deal more fully with material and manufacture. In addition to specifying materials for cold forged bolts, screws and nuts and offering guidance in the selection of materials for those produced by other methods, the standard now includes full details of the tests to be employed for determining the mechanical properties of the fasteners. Reference is also made to the control of decarburization and rolling laps.
Special attention is drawn to an important feature of this revision, namely the replacement of Grade R bolts which had a tensile range of 45 to 55 tonf/in2 with Grade S bolts having a minimum tensile strength of 50 tonf/in2 which is more nearly in line with both American and continental practice.
BS3410, “Metal washers for general engineering purposes.”
Licensed Copy: :FULLNAME, : DATE, Uncontrolled Copy, (c) BSI
© BSI 10-1999
iii
UN,UNF,UNC,UNEF 英制螺纹区别 英寸制统一螺纹的识别 英寸制统一螺纹,在英寸制国家广泛采用, 该类螺纹分三个系列:粗 牙系列 UNC ,细牙系列 UNF ,特细牙系列...
美制统一螺纹表UNC UNF_机械/仪表_工程科技_专业资料。美制粗细螺纹规格美制标准系列统一螺纹的基本公称 基本大经 牙数 直径 D,d(in) n 6 8 10 12 1/4 5...
美制统一螺纹表UNC_UNF_机械/仪表_工程科技_专业资料 暂无评价0人阅读0次下载举报文档 美制统一螺纹表UNC_UNF_机械/仪表_工程科技_专业资料。美制标准系列统一...
美制统一螺纹表UNC_UNF_机械/仪表_工程科技_专业资料 暂无评价0人阅读0次下载举报文档 美制统一螺纹表UNC_UNF_机械/仪表_工程科技_专业资料。美制标准系列统一...
热门文档