文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 人文社科 > 广告/传媒 > A physical model of an underground coal mine prototype
侵权投诉

A physical model of an underground coal mine prototype

International Journal of Mining Engineering, 1985, 3, 319-326

TECHNICAL

NOTE

A physical model of an underground coal mine

prototype Introduction The availability of sophisticated numerical models for simulation of underground prototype situations has tended to mitigate against the use of physical models. This may be short-sighted, for whilst each type of model has severe limitations, physical models are less limited than numerical models in two important areas. Firstly by using methods of dimensional analysis it is possible to relate - albeit empirically - specific behavioural characteristics of massive rock to those of the model material. Secondly it is possible with physical models to demonstrate simply some of the characteristic features of rock mass behaviour which are not always evident in numerical models. In order to illustrate the use of the technique, a large model was constructed by the authors at the University of Newcastle upon Tyne using a method developed by Singh and Singh (1967a) at the Central Mining Research Station, Dhanbad. The model simulated a well researched and documented underground deformation case history at Lynemouth Colliery Northumberland, England (Tubby and Farmer, 1981). This comprised a retreating longwall face in the Brass Thill seam at a depth of 165 m below the sea bed, approximately 8 km offshore beneath the North Sea. The face was 1.6 m high and 75 m below room and pillar developments, in the Main and High Main seams, having an extraction ratio of 0.35 and comprising 23 m x 23 m pillars and 5 m wide rooms in a working height of 2.5 m. These workings provided access for detailed deformation monitoring at the Main seam level and between the Main seam and the Brass Thill seam. Results are presented and summarized in Hodkin (1978) and Tubby and Farmer (1981) and Farmer (1984).

Development of model characteristics Core samples were available from boreholes drilled in the vicinity of the test area between the Main and Brass Thill seams and from one borehole from the sea bed. The most complete information came from the strata between the seams. This contained 46% mudstone, 21% siltstone and 20~o sandstone, in relatively thin strata. The difficulty inherent in any type of modelling can be seen in the diversity of laboratory derived characteristics in Table 1. These were obtained principally from tests on as-received specimens (on the dry side after some storage:) carried out to ASTM test specifications, and core logging.

Keywords: Coal mining; longwall face; subsidence; physical modelling. 02634546/85$03.00+.12© 1985 Chapman and Hall Ltd.

A physical model of an underground coal mine prototype

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email