multi-walled CNTs under internal and external pressure loadings (Xiao et al., 2006; Xiao and Gillespie, 2006a) as well as aligned nanotube-composites (Xiao and Gillespie, 2006b). The analytical model not only provides simple closed-form solutions but also presents a better insight of the role of the atomic networks.
The present work discusses the atomistic based finite bond element model and its application to study the effects of Stone-Wales (5-7-7-5) defects on mechanical properties and fracture behaviors of graphene sheets and carbon nanotubes. The element formulation includes eight degrees of freedom reducing computational cost compared to the 12 degrees of freedom used in other FE type models. The coefficients of the elements are determined based on the analytical molecular structural mechanics model developed by the authors. The model uses the modified Morse potential to predict the Young’s modulus and stress-strain relationship of perfect and defective nanotubes and graphene sheets. Research involving the Stone-Wales defect preformed by Tserpes, and Papanikos (2007) using the Finite Element (FE) based model does not include the deformation of the original nanotube structure around the nucleation site, which may not be true in general as atoms redistribute to minimize energy. The authors (Xiao et al., 2009) proposed a simple way to simulate the formation of a Stone-Wales (5-7-7-5) defect using an interaction mechanics method to calculate the deformations caused by the formation of a Stone-Wales.
The variation of ultimate stress, strain at failure, and Young’s modulus values of carbon nanotubes and graphene sheets has been examined as a function of the distance between two defects aligned in the axial and hoop directions has been studied. The fracture failure patterns will be presented and discussed. The mechanical properties as a function of the number of defects in the hoop direction are also studied. It is found that the moduli are sensitive to the tube lengths when the total tube length is used to compute the overall effective axial strain. If one uses a characteristic length based on the size of the local perturbation in the deformation fieldcreated by the defect to define the strain, a size independent modulus can be obtained for the defective region. The diameter of the affected region (2nm) from a single defect is defined as the defective length and is used for all different tube lengths examined in the present study. The effects of defect density on mechanical properties of tubes of any lengths are also discussed. Progressive failure in the post failure region is investigated and a few computational examples are discussed. The predictions compare favorably to the corresponding published results from experiments and numerical calculations (i.e tight binding or molecular dynamics) for armchair and zigzag carbon nanotubes.
2. An atomistic based finite bond element model
A single-walled carbon nanotube can be viewed as a hollow cylinder rolled from a graphene

dπ, where a = 0.142 nm is the C-C bond length, and the pair of integers (n1, n2) are indices to represent its helicity such as armchair (n1 = n2) and zigzag (n2 = 0) nanotubes.
There are several different potential functions available (Brenner, 1990; Abell, 1985; Tersoff, 1988) for describing C-C bond interaction other than simple harmonic functions. Among them, the modified Morse potential function (Belytschko et al., 2001) is simple and is used in the present study. The modified Morse potential function was correlated to the Brenner potential function for strains below 10%. In this paper, a new term Etorsion is added to
These novel ?ndings shed light on the phase behaviors of diversely ...Graphene sheets feature high anisotropy, with monatomic thickness (T) and ...
Analysis of nonlinear forced vibration of multi-layered graphene sheets_机械...Also, this model helps analyze nonlinear vibration behaviors of the recently ...
Such sheets can be chemically functionalized, dispersed in polymer matrices, ...The fracture edges of a graphene oxide paper sample when imaged via ...
Electrochemical behaviors of graphene-ZnO and graphene-SnO2 composite films ...After that, the mixed slush was coated on graphite sheets by screen-...
Theoretically same fracture strength as nanotubes ?...of Graphene Sheets Single-layer arches Double-...behaviors which are foreseen to be used in the ...
crystallization behaviors of poly(3-hexylthiophene)-reduced graphene ......It is seen that the majority of GO sheets are monolayer with an average ...
their fracture strength should be comparable to that of carbon nanotubes ...The presence of these functional groups makes graphene oxide sheets strongly ...
Tribology Study of Reduced Graphene Oxide Sheets on Silicon Substrate ...In this study, the tribological behaviors of the assembled APTES-RGO are ...
05/14/2011 2 Graphene ambipolar behaviors Ambipolar electric field effect in single-layer graphene. The insets show its conical lowenergy spectrum E(k), ...
Aqueous Dispersion of Graphene Sheets Stabilized by Pluronic Copolymers ...Figure 8. Steady rheological behaviors of the native and hybrid hydrogels. ...
热门文档