802.11跨层优化

Integrated Application MAC Modeling for Cross-Layer Optimized Wireless Video
Raymond S Wong1 Sai Shankar N2 Mihaela van der Schaar1
1
Department of ECE, University of California, Davis, CA, USA
2
Philips Research USA, 345 Scarborough Road, Briarcliff Manor, 10510, NY, USA
Abstract— Cross-layer optimization has been recently proposed for improving the performance of real-time video transmission over 802.11 WLANs. To perform cross-layer optimization, realistic analytical models are necessary that are able to accurately predict the interactions between layers, such that the parameters of the physical, MAC, transport and application layers are correctly identified. In this paper, we propose to modify existing IEEE 802.11 WLAN MAC models to explicitly consider how they impact and are impacted by the application layer in real-time video transmission systems. Specifically, we adapt existing MAC Distributed Coordination Function (DCF) models to consider the actual arrival rates of video flow packets, as well as provide adaptive retransmission limit for video packets with different priorities. Conversely, the video application can adjust the maximum retransmission limit per packet and the video rate based on realistic 802.11 MAC models rather than on simplistic two-state Markov models for packet-losses. Consequently, these integrated MAC-application layer models can be used to assist the cross-layer optimization for real-time wireless transmission by realistically predicting the interactions between layers.
Index Terms— MAC models, wireless multimedia, cross-layer adaptation, multimedia adaptation, robust video transmission, IEEE 802.11e.
I. INTRODUCTION
T
o enable efficient and robust transmission of multimedia over 802.11 wireless LAN (WLAN) networks [1], a formal understanding of the various transmission algorithms and protocols and their interactions is necessary. For this, realistic analytical models need to be build that are able to predict the performance impact of different cross protocol layer adaptation strategies under varying channel conditions, application requirements, and content characteristics. These models may then be used to drive the cross-layer optimization for optimal wireless multimedia transmission at each station as well as centralized or distributed resource management across stations. Currently, the performance of various OSI layer protocols is modeled in a “layered” manner that does not consider interactions between different layers. For instance, in [2], a model has been constructed to capture the features (such as back-off process etc.) and predict the performance of the 802.11 MAC Distributed Coordination Function in terms of throughput, packet-loss and delay, in a “layered” setting. Similarly, numerous multimedia traffic models have been proposed at application-layer, but these do not consider any interaction with the lower layers.
In this paper, we propose a new integrated framework for modeling the performance of MAC and applications layers involved in wireless multimedia transmission that can be used for cross-layer optimization. Constructing such “cross-layer models” is very challenging because the adaptation strategies at the various layers operate on different units of the multimedia traffic and take as input different types of information. For instance, the MAC layer is concerned with individual packet transmission and its performance depends heavily on the channel characteristics, while the application layer is concerned with multimedia flows, that consider the distortion dependencies between packets, and its performance depends heavily on the multimedia content characteristics. Moreover, while the MAC layer is delay-constraint agnostic and will attempt to forward all packets present in the MAC queue, the application layer will transmit only those packets that can arrive within the stringent delay constraints of video streaming applications. Consequently, rather than jointly modeling the MAC-Application layers, we propose to adapt existing MAC and application layer models to explicitly consider the impact of the other layer.
Previous research in the area of 802.11 WLAN MAC modeling [2][3][6] assumes saturated network conditions. However, in reality, the network condition will depend on the application layer transmission bit-rates. In this paper, we modify the analytical approach of [2],[3], and [4] and incorporate the arrival rate of the application explicitly in the MAC-layer modeling. By doing so, we capture the transmission characteristics of the MAC accurately, and in return, can accurately model the interaction between MAC and application layers. This integrated model is than used to assist the cross-layer optimization determining the optimal retransmission limits for the various video packets that leads to the maximum video performance (i.e. PSNR).
The rest of the paper is organized as follows. In section 2 we introduce the modified Markov model for the backoff process of 802.11 MAC that considers application layer characteristics. We also derive the optimal MAC backoff stage given application Quality of Service (QoS) constraints of delay and packet loss. In section 3, simulations results are shown using our model approach. Section 4 summarizes the conclusions.
application layer to achieve the best video ...Zhang, “An integrated scheme for automatic video...Cross-layer Optimized Wireless Multimedia ...
cross-layer design are demonstrated for video ... or the application layer can adapt its ...to reach optimized usage of the wireless channel....
Integrated MAC and Routing Protocol for Wireless ...solutions optimized for specic application classes. ... cross-layer integration, MAC, power-saving mode...
Proxy-driven ratedistortion optimized video ... MAC layer FEC/ARQ, application layer FEC and ...Following the discussion of channel modeling in ...
Cross-layer optimization for OFDM wireless ...provisioning when application performance is the key...when they are optimized for the sum of ...
cross-layer optimized system to maximize the ...layer are integrated for wireless ad hoc networks... video encoder resides in the application layer. ...
A cross-layer framework for wireless LAN QoS ...They can be assigned directly by the application ...from the performance modeling to a compact policy...
wireless home networks as an application example. ... utilizing the rate-distortion optimized framework ...The bene?t of cross-layer video rate adaptation...
Video Transmission over Wireless LANs Pierre Ferr?...and can also be integrated onto handheld devices....Layer Application Transport Network Link/MAC Packet...
over Wireless Networks with Heterogeneous L_专业...optimized rate allocation among multiple video ...MAC layer and the applicationlayer video rate ...
热门文档