ASA remote VPN配置实例
Enter the ip local pool command in global config mode in order to configure IP address pools to use for VPN remote access tunnels. In order to delete address pools, enter the no form of this command.
The security appliance uses address pools based on the tunnel group for the connection. If you configure more than one address pool for a tunnel group, the security appliance uses them in the order in which they are configured. Issue this command in order to create a pool of local addresses that can be used to assign dynamic addresses to remote-access VPN Clients:
ASA-AIP-CLI(config)#ip local pool vpnpool 172.16.1.100-172.16.1.199 mask
255.255.255.0
Issue this command:
ASA-AIP-CLI(config)#username marty password 12345678
Issue this set of commands in order to configure the specific tunnel:
ASA-AIP-CLI(config)#isakmp policy 1 authentication pre-share
ASA-AIP-CLI(config)#isakmp policy 1 encryption 3des
ASA-AIP-CLI(config)#isakmp policy 1 hash sha
ASA-AIP-CLI(config)#isakmp policy 1 group 2
ASA-AIP-CLI(config)#isakmp policy 1 lifetime 43200
ASA-AIP-CLI(config)#isakmp enable outside
ASA-AIP-CLI(config)#crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac ASA-AIP-CLI(config)#crypto dynamic-map outside_dyn_map 10 set transform-set ESP-3DES-SHA
ASA-AIP-CLI(config)#crypto dynamic-map Outside_dyn_map 10 set reverse-route
ASA-AIP-CLI(config)#crypto dynamic-map outside_dyn_map 10 set security-association lifetime seconds 288000
ASA-AIP-CLI(config)#crypto map Outside_map 10 ipsec-isakmp dynamic Outside_dyn_map
ASA-AIP-CLI(config)#crypto map outside_map interface outside
ASA-AIP-CLI(config)#crypto isakmp nat-traversal
Optional: If you would like the connection to bypass the access-list that is applied to the interface, issue this command:
ASA-AIP-CLI(config)#sysopt connection permit-ipsec
Note: This command works on 7.x images before 7.2(2). If you use image 7.2(2), issue the ASA-AIP-CLI(config)#sysopt connection permit-vpn command.
Issue this command:
ASA-AIP-CLI(config)#group-policy hillvalleyvpn internal
Issue these commands in order to configure client connection settings:
ASA-AIP-CLI(config)#group-policy hillvalleyvpn attributes
ASA-AIP-CLI(config)#(config-group-policy)#dns-server value 172.16.1.11
ASA-AIP-CLI(config)#(config-group-policy)#vpn-tunnel-protocol IPSec
ASA-AIP-CLI(config)#(config-group-policy)#default-domain value test.com
ASA5510 VPN配置(Remote VPN)_计算机硬件及网络_IT/计算机_专业资料。ASA5510... ASA remote VPN配置实例 8页 1下载券喜欢此文档的还喜欢 ASA5510防火墙VPN...
ASA动态多点VPN配置实例_信息与通信_工程科技_专业资料。ASA动态多点VPN配置... ASA VPN配置实例 3页 2下载券 ASA remote VPN配置实例 8页 1下载券 asa ...
ASA remote VPN配置实例_计算机软件及应用_IT/计算机_专业资料 暂无评价0人阅读0次下载举报文档 ASA remote VPN配置实例_计算机软件及应用_IT/计算机_专业资料...
ASA Remote-access VPN EzVPN配置_计算机软件及应用_IT/计算机_专业资料。... ASA remote VPN配置实例 7页 免费 ASA remote vpn详细调试 暂无评价 3页 ...
sa 5510 remote vpn配置实例 一、大概步骤: 1、配置各接口 2、建立客户端需要的地址池和用户名 3、定义隧道分离列表 4、建立配置IKE即ISAKMP策略。(第一阶段)...
ASA防火墙DYVPN及remote配置实例_IT/计算机_专业资料。ASA防火墙DYVPN及remoteASA 防火墙 DYVPN 及 remote-vpn 配置实例 有朋友问过我这种 VPN 配置方法,之前在 ...
Remote Access VPN 测试拓扑与说明 1、 一台 ASA5505 防火墙,一台测试 PC 主机,网线若干; 2、 公网地址段 192.168.1.X/255.255.255.0 ,模拟 Internet ...
ASA LAN -to-LAN VPN配置实例_计算机硬件及网络_IT/计算机_专业资料。LAN ... remote crypto endpt.: 10.1.1.20 pathmtu 1500, media mtu 1500 current ...
ASA5510防火墙remote_ipsec_vpn配置_计算机硬件及网络_IT/计算机_专业资料。ASA5510防火墙remote ipsec vpn配置ASA5510 防火墙 remote ipsec vpn 配置 1、IPSEC VPN...
Cisco-ASA SSL VPN配置案例_信息与通信_工程科技_专业资料。Cisco ASA 配置 ...username cisco password cisco username cisco attributes service-type remote-...
热门文档