82
CHAPTER 3
Crystal Structures and Crystal Geometry
3.6 MILLER INDICES FOR CRYSTALLOGRAPHIC PLANES IN CUBIC UNIT CELLS Sometimes it is necessary to refer to speci c lattice planes of atoms within a crystal structure, or it may be of interest to know the crystallographic orientation of a plane or group of planes in a crystal lattice. To identify crystal planes in cubic crystal structures, the Miller notation system5 is used. The Miller indices of a crystal plane are de ned as the reciprocals of the fractional intercepts (with fractions cleared) that the plane makes with the crystallographic x, y, and z axes of the three nonparallel edges of the cubic unit cell. The cube edges of the unit cell represent unit lengths, and the intercepts of the lattice planes are measured in terms of these unit lengths. The procedure for determining the Miller indices for a cubic crystal plane is as follows: 1. Choose a plane that does not pass through the origin at (0, 0, 0). 2. Determine the intercepts of the plane in terms of the crystallographic x, y, and z axes for a unit cube. These intercepts may be fractions. 3. Form the reciprocals of these intercepts. 4. Clear fractions and determine the smallest set of whole numbers
that are in the same ratio as the intercepts. These whole numbers are the Miller indices of the crystallographic plane and are enclosed in parentheses without the use of commas. The notation (hkl) is used to indicate Miller indices in a general sense, where h, k, and l are the Miller indices of a cubic crystal plane for the x, y, and z axes, respectively. Figure 3.13 shows three of the most important crystallographic planes of cubic crystal structures. Let us rst consider the shaded crystal plane in Fig. 3.13a, which has the intercepts 1,∞,∞ for the x, y, and z axes, respectively. We take the reciprocals of these intercepts to obtain the Miller indices, which are therefore 1, 0, 0. Since these numbers do not involve fractions, the Miller indices for this plane are (100), which is read as the one-zero-zero plane. Next let us consider the second plane shown in Fig. 3.13b. The intercepts of this plane are 1, 1,∞. Since the reciprocals of these numbers are 1, 1, 0, which do not involve fractions, the Miller indices of this plane are (110). Finally, the third plane (Fig. 3.13c) has the intercepts 1, 1, 1, which give the Miller indices (111) for this plane. Consider now the cubic crystal plane shown in Fig. 3.14 which has the in, 2, 1. The reciprocals of these intercepts are 3, 3, 1. Since fractional intercepts 1 3 3 2 tercepts are not allowed, these fractional intercepts must be multiplied by 2 to fraction. Thus, the reciprocal intercepts become 6, 3, 2 and the Miller clear the 3 2 5
William Hallowes Miller (1801–1880). English crystallographer who published a“Treatise on Crystallography” in 1839, using crystallographic reference axes that were parallel to the crystal edges and using reciprocal indices.

Synthesis, Crystal Structures and Fluorescence Properties of Two_材料科学_...ve-coordinated by N1, N7, O5 atoms in a trigonalplanar geometry and ...
Hydrothermal syntheses and crystal structures of two rectangular_能源/化工_...1(a). Each Ni(II) atom is in a distorted octahedral geometry, being ...
(v) 43-54 Synthesis and crystal structures of cis-palladium(II) and cis...The local geometry of the metallic atoms can be described as square planar...
FEATURE ARTICLE www.rsc.org/chemcomm ChemComm Photochromism of diarylethene single crystals: crystal structures and photochromic performance{ Masakazu Morimoto ...
Structures: metal, ceramic and polymer Typical structures Theoretical Density Crystal growth and anistropy Carbon Allotropes Crystal Structure: geometry + atom ...
The three common crystal structures found in metals are then detailed, along...geometry, with atoms located at each of the corners and the centers of ...
Each CoII center atom adopts a distorted octahedral geometry. Four N atoms ...X-ray Single-Crystal Structures and Magnetic Properties[外文期刊] 2003(22) ...
Syntheses and crystal structures of diorganotin (IV) moieties 隐藏>> ...geometry with C(13) and C(14) atoms occupying the axial sites and the ...
organic compounds Acta Crystallographica Section C Crystal Structure Communications...Hydrogen-bonding geometry (A, ). D?H? ? ?A N1?H1A? ? ?O5 N2...
and the geometry of the chloro ligand to the linker chain emerge as the...Notably, no crystal structures of heterodinuclear ruthenium–platinum complexes,...
热门文档