射频芯片资料
nRF24L01 Product Specification6 Radio Control
This chapter describes the different modes the nRF24L01 radio transceiver can operate in and the param-eters used to control the radio.
The nRF24L01 has a built-in state machine that controls the transitions between the different operating modes of the chip. The state machine takes input from user defined register values and internal signals.
6.1 Operational Modes
The nRF24L01 can be configured in four main modes of operation. This section describes these modes.
6.1.1 State diagram
The state diagram () shows the modes the nRF24L01 can operate in and how they are accessed. The nRF24L01 is undefined until the VDD becomes 1.9V or higher. When this happens nRF24L01 enters the Power on reset state where it remains in reset until it enters the Power Down mode. Even when the nRF24L01 enters Power Down mode the MCU can control the chip through the SPI and the Chip Enable (CE) pin Three types of states are used in the state diagram. “Recommended operating mode” is a state that is used during normal operation. “Possible operating mode” is a state that is allowed to use, but it is not used during normal operation. “Transition state” is a time limited state used during start up of the oscil-lator and settling of the PLL.
Revision 2.0 Page 19 of 74

NRF24L01 时序信息: nRF24L01 时序 掉电模式→待机模式 待机模式→发送/接收模式 CE 高电平保持时间 CSN 为低电平, 上升沿的延迟时间 CE 最大值 1.5ms 130...
NRF24L01_中文_信息与通信_工程科技_专业资料。nRF24L01 中文 用户手册2.4GHz 单片高速 2Mbps 无线收发芯片功能描述:真正的 GFSK 单片式收发芯片 内置硬件链路层...
(nRF24L01)寄存器地址*** #define CONFIG 0x00 // 配置收发状态,CRC校验模式以及收发状态响应方式 #define EN_AA 0x01 // 自动应答功能设置 #define EN_RXAD...
nRF24L01 在接收模式下可以接收 6 路不同通道的数据,见下图。每一个数据通道使用不同的地址,但 是共用相同的频道。也就是说 6 个不同的 nRF24L01 设置为...
nRF24L01-2.4GHz 单片高速 2Mbps 无线收发芯片_电子/电路_工程科技_专业资料。nRF24L01 是一款工作在 2.4~2.5GHz 世界通用 ISM 频段的单片无线收发器芯片。...
nRF24L01 是 Nordic 公司生产的一个单芯片射频收发器件, 是目前应用比较广泛的一款无线 通讯芯片,具体手册资料网上大把,我就不再重复它的特性什么的了,直接说说...
NRF24L01_电子/电路_工程科技_专业资料。NRF24L01 无线模块摘要:提出并实现了无线传输在智能小车上的使用方法。将无线模块添加到智能小车报站系统 (或其他需要...
***nRF24L01 端口初始化 *** void Port_init_nRF24L01(void) { DDRA_Bit0=1; //CE 设为输出 DDRA_Bit1=1; //CSN 设为输出 DDRA_Bit2=1; //SCK...
此时 NRF20L01 要做的工作是:首先,给高频前端供电;其次,射频数据打包(加字 头和 CRC 校验码) ;再次,高速发送数据包;最后,发射完成,NRF24L01 进入空闲模式。 ...
成都江腾科技有限公司 JTT-24L01+说明书 JTT-24L01+说明书 V1.1 JTT-24... 2.4G双向收发模块NRF24L... 暂无评价 8页 免费 nRF24L01无线单收发模块 ...
热门文档