文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 人文社科 > 文学研究 > ELASTIC-PLASTIC WAVE PROPAGATION IN CYLINDRICAL BARS
侵权投诉

ELASTIC-PLASTIC WAVE PROPAGATION IN CYLINDRICAL BARS

ELASTIC-PLASTIC WAVE PROPAGATION IN CYLINDRICAL BARS J. Buchar, Z. Bilek, P. Polcar, Z. Kn6sl Institute of Physical Metallurgy, Czechosl. Acad. Sci., Zi~kova 22, 616 62 Brno, Czechoslovakia

Making use of the dynamic, elastic-plastic finite element program, the elasticplastic wave propagation in a cylindrical bar with a circular cross section is analysed for linear work hardening. Special attention is given to the axial stress distribution for various impact loading conditions. Comparison is made between numerical two-dimensional and analytical one-dimensional results for structural low alloy steel having strain rate independent dynamic mechanical properties. The implications of practical importance for experimental dynamic plasticity studies are worked out. INTRODUCTION

To investigate physical and mechanical properties of various materials at high strain rates, the bar impact configurations are frequently used[1]. The impact loading produces a complex stress and strain state which usually differs from those created by static or dynamic periodic loading[2]. At present the reliable description of stress waves propagation was developed for elastic and linear visco-elastic media[3]. Following this description the equations relating the duration of stress wave (or frequency of monochromatic wave) to the transverse dimensions of bars were derived and therefore the validity of commonly accepted uniaxial stress state assumption can be directly verified[4]. Complications arise when the maximum stresS transmitted by the stress wave is comparable to, or higher than, the yield stress of the bar material. Little has been published about the general theory of elasticplastic waves behaviour[5] and the actual situation is usually approximated by various simplified models[6, 8]. On the other hand, prediction of important physical, mechanical and fracture properties of structural materials req.uires a detailed knowledge of stress and strain distribution in bars as a function of time dependent loading conditions, time, strain rate, etc. The purpose of the present investigation is to determine the stress and strain state during the elastic-plastic stress wave propagation in a cylindrical bar with a circular cross section by means of finite element code FEMB[9] devised recently to solve numerically two-dimensional and axial symmetric problems of dynamic continuum mechanics. The solved problem and its boundary conditions were chosen in such a way to make the solution of corresponding one-dimensional case also possible. A subsequent comparison of finite element axial symmetric computations with analytical, one-dimensional results obtained in a closed from, indicates important differences between them and defines restricted validity of the latter. For the analysis, Czech. d. Phys. B 33[1983]

1323

ELASTIC-PLASTIC WAVE PROPAGATION IN CYLINDRICAL BARS

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email