外文文献
RARE METALS
Vol. 28, No. 3, Jun 2009, p. 261 DOI: 10.1007/s12598-009-0052-0
Powder injection molding of pure titanium
GUO Shiboa, b, DUAN Bohuab, HE Xinbob, and QU Xuanhuib
Advanced Materials Synthesis and Applied Technology Laboratory, College of Electromechanical Engineering, Hunan University of Science and Engineering, Xiangtan 411201, China b
School of Materials Science and Engineering, University of Science and Technology of Beijing, Beijing 100083, China Received 2 June 2008, received in revised form 17 September 2008, accepted 19 September 2008
a
Abstract
An improved wax-based binder was developed for powder injection molding of pure titanium. A critical powder loading of 69 vol.% and a pseudo-plastic flow behavior were obtained by the feedstock based on the binder. The injection molding, debinding, and sintering process were studied. An ideal control of carbon and oxygen contents was achieved by thermal debinding in vacuum atmosphere (10 3 Pa). The me-chanical properties of as-sintered specimens were less than those of titanium made by the conventional press-sintering process. Good shape retention and ±0.04 mm dimension deviation were achieved.
Keywords: powder injection molding; titanium; debinding; sintering; mechanical properties
1. Introduction
Titanium and its alloys are materials of great interest be-cause of their unique combination of low density, high spe-cific strength, biocompatibility, and excellent corrosion re-sistance [1]. However, due to the high cost of processing, the use of these alloys remains limited to niche applications where performance justifies expense, primarily in the aero-space and biomedical markets [2-4]. Titanium and its alloys can only be made with the powder metallurgy process for their particular characteristics. Because of the nature of the traditional powder metallurgy process, components can only be formed and therefore designed with two dimensions of flexibility, the third dimension being reserved for the press-ing operation. Powder injection molding (PIM), which is derived from plastic injection molding, is a kind of net-shape powder metallurgy forming process [5-8]. PIM has been used with great success in manufacturing large volumes of small-to-moderate size, net-shape components out of metals such as tungsten based high alloy, steel, and nickel [9-12]. However, the process has found far less application with reactive metals, such as titanium, zirconium, niobium, and molybdenum, primarily because of problems with carbon and oxygen impurities. Even at low concentra-tion, these interstitials can severely degrade the mechanical properties of titanium and its alloys [13]. Thus, while the ti-
Corresponding author: GUO Shibo E-mail: guoshibo163@163.com
tanium PIM (Ti-PIM) is used to manufacture novelty items
such as watch cases, medical devices, dental parts, and golf club heads, it has yet to find significant application in ad-vanced engineering components.
Work conducted on Ti-PIM in the early 1980s utilized thermoplastic or thermoset-based binders of the type em-ployed in other metal injection molding processes, with these materials constituting 40-50 vol.% of the feedstock and downstream binder removal taking place via thermal pyrolysis [14]. More recently, binders have been designed that are soluble in water or organic solvents or contain a catalyst that facilitates in situ decomposition [15]. However, feedstocks that employ these materials still require high binder loadings. In the current study, an alternate approach has been developed that uses an improved binder and thus requires only a fraction of the traditional binder material as a minor additive. The advantage of the binder is that it melts and can be completely removed at relatively low tempera-tures. The key in using the improved binder for PIM is in selecting appropriate minor additives that facilitate de-molding without breakage and provide enough residual strength that the component can be handled after debinding. In this study, an improved wax-based binder is developed for powder injection molding of titanium. The rheological properties of the feedstock and injection molding process are investigated.
doc.guandang.net
要写毕业论文了,要外文文献翻译,好的外文文献这里找!_专业资料。要写毕业论文了,要外文文献翻译,好的外文文献这里找!今日推荐 157份文档 ...
一些免费的外文文献数据库_英语学习_外语学习_教育专区。一些免费的外文文献数据库一些免费的外文文献数据库 文献数据库, 外文方便大家查找外文文献 1. The NASA ...
外文文献数据库_工学_高等教育_教育专区。本文档是针对外文数据库的,方便研究者对外文数据库的文献的查阅SCI/EI——文摘 PQDT(全文) 1. The NASA Astrophysics ...
如何找外文文献_其它_总结/汇报_实用文档。好的外文文献可以从这里找! 香港科技大学图书馆 Dspace http://repository.ust.hk/dspace 包括香港科技大学的学术论文...
如何翻译外文文献在科研过程中阅读翻译外文文献是一个非常重要 的环节,许多领域高水平的文献都是外文文献,借鉴 一些外文文献翻译的经验是非常必要的。由于特殊原 因...
外文文献哪里找_数学_自然科学_专业资料。外文文献翻译,好的外文文献可以从这里...://www.openj-gate.org/ 提供 4350 种开放获取的期刊的数百万期刊全文文献。...
外文文献翻译_金融/投资_经管营销_专业资料。华南理工大学广州学院 本科生毕业设计(论文)翻译 英文原文名 Cost control based on value chain paying equal ...
外文文献_专业资料。很好的修改外文翻译 First, the development of simulator Throughout nearly two decades of national development process of simulation ...
1 广东工业大学 华立学院 本科毕业设计 (论文) 外文参考文献译文及原文 系部 外语外 贸学部(经济学部) 专业 国际经济与贸易(经济学) 班级 07 国际经济与贸易(...
外文文献翻译工具大全外文文献翻译工具大全隐藏>> 在科研过程中阅读翻译外文文献是一个非常重要的环节,许多领域高水平的文献都是外文文献, 借鉴一些外文文献翻译的...
热门文档