AATCC Test Method 16-2004
Colorfastness to Light
Developed in 1964 by AATCC Commit-tee RA50; revised 1971, 1974, 1978,1981, 1982, 1990 (Supersedes AATCCTest Methods 16-1987, 16A-1988, 16C-1988, 16D-1988, 16E-1987, 16F-1988and 16G-1985), 1993, 2003, 2004; re-affirmed 1977, 1998; editorially revised1983, 1984, 1986, 1995, 1996. Tech-nically equivalent: Option 6-ISO 105-B01; Related to Option 3-ISO 105-B02.
Precision and Bias........................References....................................Notes............................................Appendix......................................
2. Principle
29-303132A-C
1. Purpose and Scope
1.1 This test method provides the gen-eral principles and procedures which arecurrently in use for determining the col-orfastness to light of textile materials.The test options described are applicableto textile materials of all kinds and forcolorants, finishes and treatments appliedto textile materials.
Test options included are:
1—Enclosed Carbon-Arc Lamp, Contin-uous Light
2—Enclosed Carbon-Arc Lamp, Alter-nate Light and Dark
3—Xenon-Arc Lamp, Continuous Light,Black Panel Option
4—Xenon-Arc Lamp, Alternate Lightand Dark
5—Xenon-Arc Lamp, Continuous Light,Black Standard Option6—Daylight Behind Glass
1.2 The use of these test options doesnot imply, expressly or otherwise, an ac-celerated test for a specific application.The relationship between any lightfast-ness test and the actual exposure in usemust be determined and agreed upon bythe contractual parties.
1.3 This test method contains the fol-lowing sections that assist in the use andimplementation of the various optionsfordetermining lightfastness of textilematerials.
Section
Terminology.................................3Safety Precautions.......................4Uses and Limitations...................5Apparatus and Materials..............6Comparison Standards.................7Test Specimen Preparation..........8Machine Operating Conditions...9Calibration and Verification........10-12AATCC Fading Unit
Measurement............................13-14Machine Exposure Procedures....15-18Daylight Exposure Procedures....19-22Evaluation of Results...................23-27Report..........................................28
2.1 Samples of the textile material tobe tested and the agreed upon comparisonstandard(s) are exposed simultaneouslyto a light source under specified condi-tions. The colorfastness to light of thespecimen is evaluated by comparison ofthe color change of the exposed portionto the masked control portion of the testspecimen or unexposed original materialusing the AATCC Gray Scale for ColorChange, or by instrumental color mea-surement. Lightfastness classification isaccomplished by evaluation versus a si-multaneously exposed series of AATCCBlue Wool Lightfastness Standards.
3. Terminology
3.1 AATCC Blue Wool LightfastnessStandard, n.—one of a group of dyedwool fabrics distributed by AATCC foruse in determining the amount of lightexposure of specimens during lightfast-ness testing (see 32.1).
3.2 AATCC Fading Unit (AFU), n.—a specific amount of exposure made un-der the conditions specified in varioustest methods where one AFU is one-twentieth (1/20) of the light-on exposurerequired to produce a color change equalto Step 4 on the Gray Scale for ColorChange or 1.7 ± 0.3 CIELAB units ofcolor difference on AATCC Blue WoolLightfastness Standard L4.
3.3 black-panel thermometer, n.—atemperature measuring device, the sens-ing unit of which is coated with blackpaint designed to absorb most of the radi-ant energy encountered in lightfastnesstesting (see 32.2).
3.3.1 This device provides an estima-tion of the maximum temperature a spec-imen may attain during exposure to natu-ral or artificial light. Any deviation fromthe geometry of this device described in32.2 may have an influence on the mea-sured temperature.
3.4 black standard thermometer,n.—a temperature measuring device, thesensing unit of which is coated with blackmaterial designed to absorb most of theradiant energy encountered in lightfast-ness testing and is thermally insulated bymeans of a plastic plate (see 32.2).
3.4.1 This device provides an estima-
tion of the maximum temperature a spec-imen may attain during exposure to natu-ral or artificial light. Any deviation fromthe geometry of the device described in32.2 may have an influence on the mea-sured temperature. The temperature mea-sured by the black standard thermometerwill not be the same as that measured bythe black-panel thermometer; therefore,they cannot be used interchangeably.3.5 broad bandpass radiometer, n.—a relative term applied to radiometers thathave a bandpass width of more than20nm at 50% of maximum transmittanceand can be used to measure irradiance atwavelengths such as 300-400 nm or 300-800 nm.
3.6 color change, n.—as used in col-orfastness testing, a change in color ofany kind whether a change in lightness,hue or chroma or any combination ofthese, discernible by comparing the testspecimen with a corresponding untestedspecimen.
3.7 colorfastness, n.—the resistance ofa material to change in any of its colorcharacteristics, to transfer of its colo-rant(s) to adjacent materials, or both as aresult of exposure of the material to anyenvironment that might be encounteredduring the processing, testing, storage oruse of the material.
3.8 colorfastness to light, n.—the re-sistance of a material to a change in itscolor characteristics as a result of expo-sure of the material to sunlight or an arti-ficial light source.
3.9 infrared radiation, n.—radiantenergy for which the wavelengths of themonochromatic components are greaterthan those for visible radiation and lessthan about 1 mm.
NOTE: The limits of the spectral rangeof infrared radiation are not well definedand may vary according to the user. Com-mittee E-2.1.2 of the CIE distinguishes inthe spectral range between 780 nm and1mm:IR-A780-1400 nmIR-B1.4-3.0 µmIR-C3 µm to 1 mm
3.10 irradiance, n.—radiant power perunit area incident on a receiver, typicallyreported in watts per square meter, W/(m2nm).
3.11 “L” designation, n.—the se-quence number given each AATCC BlueWool Lightfastness Standard according tothe number of AATCC Fading Units re-quired to produce a color change equal toStep 4 on the AATCC Gray Scale forColor Change.
AATCC Technical Manual/2005
Copyright © 2004 American Association of Textile Chemists and Colorists
TM 16-200423
TM 16-2004 3 AATCC Test Method 16-2004 表 1 可选择方法的仪器曝晒条件 组成 光源 黑板温度计 (光周期) 黑板标准温度计 (光周期) 测试室内 空气温度 相对...
AATCC TM 16_2004 AATCC TM 22-2005 AATCC TM 35-2006 AATCC TM 163-... AATCC takes no position respecting the validity of any patent rights ...
2页 免费 AATCC 61-2006 5页 2财富值 AATCC TM 16_2004 12页 免费 AATCC 143-2006 4页 免费 AATCC TM 106-2009 2页 1财富值喜欢此文档的还喜欢...
AATCC 183-2004[1]_机械/仪表_工程科技_专业资料。成分分析今日推荐 ... AATCC 30-2004 4页 免费 AATCC TM 16_2004 12页 免费 AATCC 16-2004 15...
3页 免费 aatcc tm 193 2页 免费 AATCC TM 35-2006 2页 免费 AATCC TM 16_2004 12页 免费 AATCC 158-2005 3页 免费喜欢此文档的还喜欢...
AATCC 16-2004 耐光色牢度_专业资料。中文版美标耐光色牢度1.0 目的和范围 1.1 本测试方法提供当前采用的测定纺织材料耐光色牢度的通则和程序。备选的测试方 ...
AATCC 16 2004 耐光色牢度 中文翻译_纺织/轻工业_工程科技_专业资料。AATCC 16 2004 耐光色牢度 中文翻译AATCC 16-2004 耐光色牢度 耐光色牢度 1964 年由 ...
8页 免费 TM 214100_2004 暂无评价 8页 免费 AATCC TM 16_2004 12页 免费 GME TM 207300-2004 电动雨... 8页 2财富值 tm-10-04 暂无评价 27页 免费...
9页 免费 TM 214100_2004 暂无评价 8页 免费 AATCC TM 16_2004 12页 免费 GME TM 207300-2004 电动雨... 8页 2财富值 tm-10-04 暂无评价 27页 免费...
热门文档