JESD
JEDEC Standard No. 22-A100-B
Page 1
TEST METHOD A100-B
CYCLED TEMPERATURE-HUMIDITY-BIAS LIFE TEST
(From JEDEC Board Ballot JCB-99-80, formulated under the cognizance of JC-14.1 Committee onReliability Test Methods for Packaged Devices.)1 Purpose
The Cycled Temperature-humidity-bias Life Test is performed for the purpose of evaluating the reliabilityof nonhermetic packaged solid state devices in humid environments. It employs conditions of temperaturecycling, humidity, and bias that accelerate the penetration of moisture through the external protectivematerial (encapsulant or seal) or along the interface between the external protective material and themetallic conductors that pass through it.2 Scope
The Cycled Temperature-Humidity-Bias Life Test is typically performed on cavity packages (e.g.MQUADs, lidded ceramic pin grid arrays, etc.) as an alternative to JESD22-A101 or JESD22-A110.3 Apparatus
The test requires a temperature-humidity test chamber capable of maintaining a specified temperature andrelative humidity profile continuously, while providing electrical connections to the devices under test ina specified biasing configuration.
3.1 Temperature and relative humidity
The chamber must be capable of providing controlled conditions of temperature and relative humidity asdescribed in clause 4, Test Conditions.
3.2 Recording device
A recording device (e.g. a chart recorder or a computer) with an interface to suitable chamber monitoringinstrumentation shall be provided for continuous recording of chamber temperature and relative humidity.
3.3 Devices under stress
Devices under stress must be physically located to minimize temperature gradients.
3.4 Minimize release of contamination
Care must be exercised in the choice of board and socket materials, to minimize release of contamination,and to minimize degradation due to corrosion and other mechanisms.
Test Method A100-B
(Revision of A-100-A)
JEDEC STANDARD Cycled Temperature-Humidity-Bias Life Test JESD22-A100D (Revision of JESD22-A100-C,October 2007) JULY 2013 JEDEC SOLID STATE TECHNOLOGY ...
JEDEC 工业标准 环境应力试验 [JDa1] JESD22-A100-B Cycled Temperature-Humidity-Bias Life Test 上电温湿度循环寿命试验, (Revision of JESD22-A100-A) ...
Samples are subjected to a non-condensing, humid atmosphere, similar to the JESD-22-A101, "Steady State Temperature, Humidity and Bias Life Test", but...
JEDEC 工业标准 环境应力试验 [JDa1] JESD22-A100-B Cycled Temperature-Humidity-Bias Life Test 上电温湿度循环寿命试验, (Revi...
JEDEC STANDARD Cycled Temperature-Humidity-Bias Life Test JESD22-A100C (Revision of JESD22-A100-B, April 2000) OCTOBER 2007 JEDEC SOLID STATE TECHNOLOGY ...
(High/ Low Temperature Operating Life)目的: 评估...JESD22-A113-D EIAJED- 4701-B101 评估结果:八...(Temperature Humidity Bias Test)目的: 评估 IC ...
humidity (autoclave), extreme hot and cold ...life testing as a DC biased elevated temperature ...JESD22-A110B -40°C to +85°C Cycled bias (...
humidity (autoclave), extreme hot and cold ...life testing as a DC biased elevated temperature ...JESD22-A110B -40°C to +85°C Cycled bias (...
humidity (autoclave), extreme hot and cold ...life testing as a DC biased elevated temperature ...JESD22-A110B -40°C to +85°C Cycled bias (...
B Bias Current Source Test Condition Temperature :...a period (2) Vibration time : period cycled ...Humidity resistance Inductance change : Within ± ...
热门文档