290Chin. J. Chem. Eng., Vol. 19, No. 2, April 2011
crosslinker, indicating the free radical polymerization route. The reaction order of 0.58 in the presence of the crosslinker indicates the crosslink polymerization route (Fig. 7). Similar results have been demonstrated in other acrylate polymerizations where x>1/2 corre-sponds to the competing unimolecular termination mechanism [29, 30]. Interestingly, x<1/2 has also been observed [21, 31] for the cross-linking polymerizations of the methacrylate monomers, which is attributed to the chain length dependent termination effects [32]. 4 CONCLUSIONS
REFERENCES
1
Nowers, J.R., Narasimhan, B., “The effect of interpenetrating poly-mer network formation on polymerization kinetics in an epoxy[hyphen (true graphic)]acrylate system”, Polymer, 47 (4), 1108-1118 (2006). Choi, E.C., Jin, S.M., Park, Y.J., Kim, Y., “Polymerization kinetics for the preparation of poly(p-divinylbenzene) via a miniemulsion polym-erization process”, J. Chin. Inst. Chem. Eng., 39 (5), 483-488 (2008). Hazot, P., Delair, T., Pichot, C., Chapel, J.P., Elaissari, A., “Poly(N-ethylmethacrylamide) thermally-sensitive microgel latexes: Effect of the nature of the crosslinker on the polymerization kinetics and physicochemical properties”, C. R. Chim., 6 (11-12), 1417-1424 (2003).
Imani, M., Sharifi, S., Mirzadeh, H., Ziaee, F., “Monitoring of poly-ethylene glycoldiacrylate-based hydrogel formation by real time NMR spectroscopy”, Iran. Polym. J., 16 (1), 13-20 (2007).
Nagarajan, S., Santhosh, P., Sankarasubramanian, M., Vasudevan, T., Gopalan, A., Lee, K.P., “UV-vis spectroscopy for following the ki-netics of homogeneous polymerization of diphenylamine in p-toluene sulphonic acid”, Spectrochim. Acta A, 62 (1-3), 420-430 (2005).
Rodríguez-Guadarrama, L.A., “Application of online near infrared spectroscopy to study the kinetics of anionic polymerization of buta-diene”, Eur. Polym. J., 43 (3), 928-937 (2007).
Jiang, X., Yin, J., “Study of macrophotoinitiator containing in-chain thioxanthone and coinitiator amines”, Polymer, 45 (15), 5057-5063 (2004).
Voytekunas, V.Y., Ng, F.L., Abadie, M., “Kinetics study of the UV-initiated cationic polymerization of cycloaliphatic diepoxide res-ins”, Eur. Polym. J., 44 (11), 3640-3649 (2008).
Singhal, R., Sachan, S., Rai, J., “Study of cure kinetics of polyacryla-mide hydrogels by differential scanning calorimetry”, Iran. Polym. J., 11 (3), 143-149 (2002).
Shivakumar, K., Veeraiah, M.K., Rai, K.S., Sherigara, B.S., Gowda, N., “Kinetics of polymerization of acrylonitrile initiated by the va-nadium(V)-bisulphite redox system in sulphuric and perchloric acid media”, J. Mol. Catal. A-Chem., 273 (1-2), 218-223 (2007).
Ye, Q., Ge, X., Zhang, Z., “Formation of monodisperse PMMA par-ticles by radiation-induced dispersion polymerization (I) Synthesis and polymerization kinetics”, Radiat. Phys. Chem., 66 (1), 11-16 (2003). Buback, M., Junkers, T., Müller, M., “Free-radical propagation and termination kinetics of the butyl acrylate dimer studied by pulsed la-ser polymerization techniques”, Polymer, 50 (14), 3111-3118 (2009). Barth, J., Buback, M., Schmidt-Naake, G., Woecht, I., “Termination kinetics of free-radical polymerization in ionic liquids”, Polymer, 50 (24), 5708-5712 (2009).
Miller, M.D., Holder, A.J., Kilway, K.V., Giese, G.J., Finley, J.E., Travis, D.M., Iwai, B.T., Eick, J.D., “Quantum-mechanical QSPR models for polymerization volume change of epoxides and methacry-lates based on mercury dilatometry results”, Polymer, 47 (26), 8595-8603 (2006).
Gerlach, G., Guenther, M., Suchaneck. G., Sorber, J., Arndt, K.F., Richter, A., “Application of sensitive hydrogels in chemical and pH sensors”, Macromolecular Symposia, 210 (1), 403-410 (2004).
Gerlach, G., Guenther, M., Sorber, J., Suchaneck, G., Arndt, K.F., Richter, A., “Chemical and pH sensors based on the swelling behavior of hydrogels”, Sensor. Actuat. B-Chem., 111-112, 555-561 (2005). Hoffman, A.S., “Hydrogels for biomedical applications”, Adv. Drug. Deliver. Rev., 54 (1), 3-12 (2002).
Li, X., Cui, Y., “Study on synthesis and chloramphenicol release of poly(2-hydroxyethylmethacrylate-co-acrylamide) hydrogels”, Chin. J. Chem. Eng., 16 (4), 640-645 (2008).
Pourjavadi, A., Barzegar, S., Zeidabadi, F., “Synthesis and properties of biodegradable hydrogels of [kappa]-carrageenan grafted acrylic acid-co-2-acrylamido-2-methylpropanesulfonic acid as candidates for drug delivery systems”, React. Funct. Polym., 67 (7), 644-654 (2007).
2
3
4
Acrylic acid and 2-acrylamido-2-methylpropane sulfonic acid were used as monomers, sodium persul-fate as initiator and N,N′-methylene bis(acrylamide) as crosslinker, the crosslink polymerization kinetics of AA/AMPS hydrogels was investigated by using dila-tometry. It was found that the polymerization rate equation for crosslink polymerization of AA/AMPS hydrogel was Rp=k[I]0.58[AMPS]1.14[AA]0.86. In ad-dition, the activation energy of the polymerization was calculated to be about 140 and 89 kJ·mol 1 in the presence and absence of the crosslinker, respectively, in the temperature range from 45 to 65 °C. Moreover, the crosslinker produced effects on the reaction order of the initiator and the activation energy due to the formation of cross-linked networks, which was veri-fied by FTIR spectrum. From the different termination routes between free radical polymerization and crosslink polymerization in a proposed mechanism, the influ-ence of the cross-linked network structure on the ki-netic parameters is confirmed. The results suggest that the dilatometry provides a convenient tool for the crosslink polymerization study and the cross-linked networks is a key factor in the crosslink polymerization. NOMENCLATURE
C molar concentration, mol·L 1 dM monomer density, kg·m 3
polymer density, kg·m 3 dP h0 initial liquid level height in capillary, mm
liquid level height in capillary at time t, mm ht
h change of liquid level height ( h=h0 ht), mm K apparent polymerization rate constant k polymerization rate constant
1 1
polymerization rate, mol·L·s Rp
T temperature, °C t time, h V0 initial volume, L v wavenumber, cm 1 ω mass percentage, % m reaction order of monomer n total reaction order x reaction order of initiator ini initiator cross crosslinker
5
6
7
8
9
10
11
12
13
14
15
16
17 18
Superscripts
19
Subscripts
AA_AMPS水凝胶的交联聚合反应动力学及其机理_英文_ 隐藏>> CATALYSIS, KINETICS AND REACTORS Chinese Journal of Chemical Engineering, 19(2) 285—291 (2011) ...
研究了采用溶液聚合法制备的 AA/AMPS 共聚物 Poly(AA-co-AMPS)水凝胶的吸液性能,结果表明: 合成的凝胶材料在 0.9%生理盐水中的吸液能力达到 125 g/g 以上;...
AA/AMPS共聚物水凝胶的吸液性能_专业资料。研究了采用溶液聚合法制备的AA/AMPS共聚物Poly(AA-co-AMPS)水凝胶的吸液性能,结果表明:合成的凝胶材料在0.9%生理盐水中...
西南石油大学油气藏地质及开发国家重点实验室 ,四川 成都 610500) 摘要 : 采用...AA_AM_AMPS超浓反相乳液... 5页 免费 AA_AMPS水凝胶的交联聚合... 暂无评价...
5页 免费 AA、AM和AMPS聚合物的研究... 3页 1财富值喜欢此文档的还喜欢 水...1 文献标识码: A 高分子凝胶是由交联高分子网络、 溶胀溶剂 等组成的多元体系...
( AMPS) 及非离子型单体甲基丙烯酸丁酯为原料,偶氮...( AA) 、 N - 亚甲基双丙烯酰胺 丙烯酰胺( AM...聚合物交联聚合物交联制备水凝胶有化学交联 、 物理...
P_AAEA_AMPS_AA_超大孔水凝胶的制备及性能_王立华...或支链含有大量亲水性基团并遇 水膨胀的交联聚合物...英文个人简历模板 创意简历模板汇集 推理型题分析与总结...
丙烯酰胺 (M)A与 VP共聚物水凝胶可用于蛋白 CO—AA)含物中引人温敏性聚合物...二醇双 H为乙 甲基 丙烯酸酯(GEDMA)交联剂合成共聚物水凝 为 胶的动力学 规律...
pH敏感性P(AAm-co-AA)半... 5页 2下载券 pH...历史的共聚及均聚水凝胶的溶胀皆符合二级动力学机理...交联剂配比与 #R " 相同, 聚合反应前加入 "%% ...
从 Schif f 碱反应机理, 结合红外光谱分析, 提出甲醛交联壳聚糖的交联键结构。 [ 关键词] 甲壳素; 壳聚糖; 交联改性; 保水凝胶 [ 文章编号] 1000- 8144(...
热门文档