g
GEHC China Service
SN00000-X-RAY-TS
SYSTEM: Innova 2100 - Pathfinder
PROBLEM/SYMPTOM
System boot failure, error “process XRDataMgrFront time out after start
component”, “process XRUserIfDLFront time out after start component”
reported on DL monitor during system boot up.
TROUBLESHOOTING HISTORY/HINT
1. Checked RTAC FCIB board status, found yellow LED of config component lit .
2. Exchanged .RTAC FCIB to DL, then found also LED of config component lit, green LED of Fibre Signal and FC Sync do not lit.
3. Replaced RTAC FCIB (PN 5189435) to solve the problem
ROOT CAUSE/SOLUTION
1. System boot up failed due to RTAC FCIB failed.
2. In normal status, green LED of Fibre Signal and FC Sync will light on DL FCIB but do not on RTAC one, we could not judge RTAC FCIB failed by its green LED dark, so if we doubt RTAC FCIB failed, we need to exchanged it to DL location to identify it.
FE name: Jiang Fan Mobile: 18001300800
Page 1 of 1
Innova 3100 Positioner无法启动_临床医学_医药卫生_专业资料。g SYSTEM ID: ... Frontal Positioner boot failure( One MCB extended PRD failed) 1050053:Front...
Local operating system boot fails when external storage is attached1_IT/... The failure to bootstrap the OS can be circumvented as follows: From ...
U-Boot 启动流程分析与S... 32人阅读 2页 1.00UP-2410开发板上支持DM900...
boot confreg dir help reset set tftpdnld unset boot up an external process configuration register utility list files in file system monitor builtin command ...
Failure record of the meters_英语学习_外语学习_教育专区。Failure record of...boot the system.察看咪表的时 候,第一次按下唤醒按钮,不能正常启动,多次按...
Power failure during flash updated Wrong programing while writing to ...boot up ESCD(1) Extended System Configuration Data 记录PNP设备占用的资源 IO...
Failure record of the meters_英语学习_外语学习_教育专区。Failure record of...boot the system.察看咪表的时 候,第一次按下唤醒按钮,不能正常启动,多次按...
热门文档