5.4
All Products
All Hasbro products must withstand compression test without exhibiting "significant" damage. "Significant" damage is functional and/or aesthetic damage that is non-hazardous, presents no potential for the generation of a hazardous condition, but is NOT acceptable to Marketing and/or Quality Assurance.
Wheels & Axles
Wheel and axle assemblies must withstand the compression test of section 7.4 without generating sharp points, edges or exhibiting a projection hazard or other hazardous condition(s).
The loading device shall be rigid metal disc 1.125 inches ± 0.015 inch (28.57 mm ± 0.38 mm) in diameter and 0.375 inch (9.52 mm) in thickness. The perimeter of the disc shall be rounded to a radius of 1/32 inch (0.8 mm) to eliminate irregular edges. The disc shall be attached to an appropriate compression scale having an accuracy of ± 0.5 pound (2 N) (i.e., Chatillon DPP-50).
The steel needle shall have a diameter of 0.039 ± 0.002 inch (1 ± 0.05 mm) and with a tip radius of 0.02 ± 0.002 inch (0.5 ± 0.05 mm).
5.5
6.0 TEST EQUIPMENT 6.1
6.2
7.0
TEST PROCEDURE 7.1
Testing of Toys
7.1.1 Specific contact surfaces that are subject to compression test will be
indicated on a product's test plan and/or by the Reliability Engineer. 7.1.2 Place the toy in any convenient position on a flat, hard surface. If necessary,
hold the toy in the jaws of a vise. The disc shall be positioned so that the contact surface is parallel to the surface under test. The specified force (per section 7.2) shall be directly and evenly applied within 5 seconds through the disc. This load shall be maintained for an additional 10 seconds.
7.2
Compression Forces
The specified compressive forces versus age grading are as follows:
Age Grading 0 - 36 months Over 36 months
7.3
Leakage of liquid-filled toys
7.3.1 Condition the toy at a temperature of 98.6 °F ± 1.8 °F (37 ºC ± 1 ºC) for 4
hours or more.
Compressive Force 40 lbs 40 lbs
SRS-019 SOAPY WATER TEST SPECIFICATION -C_能源/化工_工程科技_专业资料。GLOBAL QUALITY ASSURANCE SAFETY & RELIABILITY SPECIFICATIONS TITLE: SOAPY WATER TEST...
SRS-043 ACCELERATED AGING TEST SPECIFICATION -E_电子/电路_工程科技_专业资料。GLOBAL QUALITY ASSURANCE SAFETY & RELIABILITY SPECIFICATIONS TITLE: ACCELERATED ...
SRS-009 BITE TEST SPECIFICATION - G_材料科学_工程科技_专业资料 暂无评价0人阅读0次下载举报文档 SRS-009 BITE TEST SPECIFICATION - G_材料科学_工程...
SRS-024 HUMIDITY TEST SPECIFICATION -F_信息与通信_工程科技_专业资料。GLOBAL QUALITY ASSURANCE SAFETY & RELIABILITY SPECIFICATIONS TITLE: HUMIDITY TEST ...
SRS-006 TORQUE TENSION TEST SPECIFICATION --- G_英语考试_外语学习_教育专区。GLOBAL QUALITY ASSURANCE SAFETY & RELIABILITY SPECIFICATIONS TITLE: TORQUE/...
CORE-UNIFIED SOC TEST DATA COMPRESSION AND APPLICATION_专业资料。、17N.,. o102 JRN LCROCSCI)OUALOFEETNI(HNA Jnay21 aur00 CORE.UNI ...
ITO-150E-125t Specification Ver H (2)_计算机硬件及网络_IT/计算机_专业资料。ITO Film Specification Customer Name Product Name Revision Customer approval ...
TEST SPECIFICATION FOR LI-ION BATTERY SYSTEMS FOR HEV_电子/电路_工程科技_专业资料。VDA-2007TEST SPECIFICATION FOR LI-ION BATTERY SYSTEMS FOR HYBRID ...
NorDig-Unified Test specification, ver 1.0_信息与通信_工程科技_专业资料。NorDig Unified Test specification, ver 1.0 Unified NorDig Test Specifications for...
NVM 25007 rev H - SPECIFICATION FOR RESISTOR_电子/电路_工程科技_专业资料...Salt spray test. NVV 10 001 Markings NVV 10 002 Markings NVV 10 043 ...
热门文档