DIN 6912-2002 内六角中心低圆柱头螺钉
DEUTSCHE NORMDecember 2002

Hexagon socket thin head cap screws with
pilot recess
ICS21.060.10
Zylinderschrauben mit Innensechskant –Niedriger Kopf, mit Schlüsselführung
{
6912
Supersedes
May 1985 edition.
In keeping with current practice in standards published by the International Organization for Standardization(ISO), a comma has been used throughout as the decimal marker.
Foreword
This standard has been prepared by Technical Committee Schrauben mit Innenantrieb of the Normen-ausschuss Mechanische Verbindungselemente (Fasteners Standards Committee).
The DIN4000-2-1.2 tabular layout of article characteristics shall apply to screws covered in this standard.Amendments
This standard differs from the May 1985 edition as follows:
a)Hexagon socket head cap screws may now also be made of grade A4 stainless steel.
b)For stainless steel screws, the range of sizes assigned to property class 70 has been changed.c)Minimum ultimate tensile loads have been specified.d)References have been updated.Previous editions
DIN6912:1954x-03, 1967-12, 1985-05.
All dimensions are in millimetres.
1Scope
This standard specifies dimensions and technical delivery conditions for sizes M4 to M36 hexagon sockethead cap screws with pilot recess, of product grade A and made of steel, stainless steel or nonferrous metal.Where screws are to comply with specifications other than those given in this standard, these shall beselected in accordance with the relevant standards (e.g. DINEN28839, DINENISO898-1,DINENISO3506-1, DINENISO4759-1, DINISO261, and DINISO965-2).
Screws specified in this standard should not be used in the form of screw assemblies with captive washersas they are always required to have a short unthreaded portion of shank to compensate for the pilot recess.
Continued on pages 2 to 8.
Translation by DIN-Sprachendienst.
In case of doubt, the German-language original should be consulted as the authoritative text.
©No part of this translation may be reproduced without the prior permission of
DIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772Berlin, Germany,Ref.No.DIN6912:2002-12
English price group07
Sales No.0107

DIN 912-1983_内六角圆柱头螺钉_机械/仪表_工程科技_专业资料。德国标准 DIN 912-1983_内六角圆柱头螺钉今日推荐 78份文档 笑翻神图...
公制内六角圆柱头螺钉 执行标准:GB70.1、ISO4762、DIN912 材质:碳钢、合金钢、不锈钢 单位:mm 规格 d1 M1.6 M2 M2.5 M3 M4 M5 M6 M8 M10 M12 ...
内六角圆柱头螺钉 ·Hexagon socket head cap screws ·GB/T70.1-2000 ·DIN 912 ·eqv ISO 4762:1997 ·机械性能 6.8 8.8 10.9 12.9 螺纹规格 D B...
上海质品五金有限公司专业生产 DIN251 内六角圆柱头法兰面螺钉,库存齐全、规格完 善、质优价廉,欢迎您来电详谈。 产品介绍;材料:碳钢、不锈钢等,表面处理:发黑、...
GB-T_70.1-2000_内六角圆柱头螺钉_冶金/矿山/地质_工程科技_专业资料。前本标准等效采用国际标准 开槽螺钉 和 十字槽螺钉 内六角螺钉 内六角花形螺钉 圆螺母...
上海质品五金有限公司专业生产 DIN251 内六角圆柱头法兰面螺钉,库存齐全、规格完 善、质优价廉,欢迎您来电详谈。 产品介绍;材料:碳钢、不锈钢等,表面处理:发黑、...
内六角圆柱头螺钉国家标准_军事/政治_人文社科_专业资料。PartNumber M1.6×2.5_GB/T 70.1(内六角圆柱头 螺钉) M1.6×3_GB/T 70.1(内六角圆柱头 ...
内六角圆柱头螺钉标准_机械/仪表_工程科技_专业资料。今日推荐 ... 内六角圆柱头螺钉国家标... 53页 免费 DIN 7984-2009 内六角低... 11页...
内六角圆柱头 螺钉) M1.6×3_GB/T 70.1(内六角圆柱头 螺钉) M1.6×4_GB/T 70.1(内六角圆柱头 螺钉) M1.6×5_GB/T 70.1(内六角圆柱头 螺钉)...
GBT 2671.1-2004 内六角花形底圆柱头螺钉_机械/仪表_工程科技_专业资料。... DIN 7984-2009 内六角低... 11页 免费 GBT 16674.2-2004 六角... 10页...
热门文档