文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > Multidomain lithium niobate microcantilever for smart biosensor
侵权投诉

Multidomain lithium niobate microcantilever for smart biosensor

Fabrication of the bimorph lithium niobate cantilevers involves a micro machining of a z-cut wafer to create a multidomain structure. After etching, the bimorph ferroelectric cantilevers are fabricated at the locations near interdomain walls. Cantilever vi

Multidomain lithium niobate microcantilever for smart biosensor.

Igor Ostrovskii, Andriy Nadtochiy, Keith Hollis

University of Mississippi, University, MS 38677(iostrov@phy.olemiss.edu)

Abstract: Fabrication of the bimorph lithium niobate cantilevers involves a micromachining of a z-cut wafer to create a multidomain structure. After etching, the bimorph ferroelectric cantilevers are fabricated at the locations near interdomain walls. Cantilever vibrations are excited by rf voltage due to piezoelectric effect in a ferroelectric chip, and optical detection is employed to pickup the vibrations. The self-assembling layers of two different Silanes are chemically deposited on the micro cantilevers. The layers are detected independently by two methods including a low frequency shift of cantilever natural vibrations, and Raman spectral lines from the Silane layers. Possible applications include smart biosensors in a real time domain.

1. The fabrication and characterization of micro- and nano-scale cantilevers have been a subject of extensive research efforts 1,2. Several materials, such as silicon and it's compound Si3N43,4, carbon nanotubes5, gold6, magnetostrictive metal glass7 are used for cantilevers fabrication. Piezoelectric ZnO film8 and PZT ceramic9, 10 are reported in the kinds of composite cantilevers, in which a piezoelectric effect was used to excite vibrations. We cannot refer to known publications that use ferroelectric properties in this type of vibrators or ferroelectric-silane system as a component of a cantilever biosensor. At the same time, ferroelectric microcantilever has an advantage of being easily excited by applying an rf voltage to it.

In this work, we report our experiments on fabrication micro cantilevers from widely used ferroelectric material LiNbO3 (LN), which has useful chemical-physical surface properties that allow binding the silanes to its surface as a component of a smart biosensor. It is well known that ─Z plane of LN having Li─ ions on top is characterized by much faster chemical etching rate than + Z side11. We use this peculiarity for chemical fabrication of a bimorph ferroelectric cantilever by submerging a multidomain ferroelectric crystal into an acid. Fabricated cantilevers are shown schematically in Fig. 1a. We use 500-µm-thick optically polished z-cut wafers of

第1页

你可能喜欢

热门文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email