C L
ASSIC
F O
CUS
A R
TICLE
This article originally appeared in FOCUS(1986) 8:3, 5.
COMPARISONOFGLYOXALANDFORMALDEHYDEGELSFORSIZINGRRNAS
T
wo methods frequently used to denatureelectrophorese at 60 V for 1 hour and at 100 Vlarge RNAs in preparation for molecularfor 1 to 2 hours or until the leading dye hasweight determination by agarose gelmigrated 9 cm. Constant buffer circulation iselectrophoresis involve treatment of the RNAsnot necessary, but halfway through the elec-at elevated temperature with 1 M glyoxal introphoresis, mix the buffer from each chamberthe presence of 50% DMSO (1, 2) or withtogether and redistribute in the apparatus.2.2 M formaldehyde in the presence of 50%formamide (3, 4). Side-by-side comparisonsStaining, Destaining and Photography.Stainof these methods are difficult to find in thethe gel in the dark a maximum of 5 minutes inliterature. Presented below is such a compari-5 µg/ml ethidium bromide in Hson carried out with several rRNAsamplesH2O. Destain inelectrophoresed with the G2O in the dark 2 hours to overnight.IBCOBRLRNAPhotograph the gel on a short-wave UVLadder (Cat. No. 15620) as a molecular weighttransilluminator using Type 57 Polaroid filmstandard.
with the camera set at f4.5 with red and yellowfilters. Exposure time for the gels in Figure 1was 1 second.
Methods
Formaldehyde gel electrophoresis
Glyoxal Gel Electrophoresis
Buffers.10X MOPS/EDTABuffer: 0.5 M MOPSBuffers.1 M Sodium Phosphate (pH 7.0): 39 ml(pH 7.0), 0.01 M EDTA(pH 7.5); Buffer A:of 1 M NaH2PO4and 61 ml of 1 M Na2HPO4;294 µl 10X MOPS/EDTABuffer, 706 µl H2O;Glyoxal/DMSO: 125 µl DMSO, 42 µl 40% glyox-Formaldehyde/Formamide: 89 µl formaldehydeal (deionized), and 3 µl 1 M Sodium Phosphate(37%), 250 µl deionized formamide; GelBuffer (pH 7.0); Dyes: 5 mg xylene cyanol, 5 mgLoading Buffer: mix 322 µl Buffer A, 5 mg xylenebromophenol blue, 10 µl M Sodium Phosphatecyanol, 5 mg bromocresol green, and 400 mgBuffer (pH 7.0), and 900 µl Hsucrose, and then add 178 µl 37% formalde-Buffer: 0.01 M Sodium Phosphate Buffer (pH 7.0).2O; Electrophoresishyde (12.3 M) and 500 µl formamide;Electrophoresis Buffer: 1X MOPS/EDTABuffer.Sample Preparation.Place the RNAsample(1 to 3 µg in a 3 µl volume) in 0.5 ml microcen-Sample Preparation.In 0.5 ml microcentrifugetrifuge tubes. Do not dry the sample. Addtubes, dry RNAsamples (1 to 3 µg in H2O7 µl Glyoxal/DMSO and heat at 50oC for 1 hour.or 0.4% SDS) under vacuum. Add 2.2 µlAdd 1 µl of Dyes just before electrophoresis.Buffer Aand dissolve RNA. Then add 4.8 µlFormaldehyde/Formamide (final concentrationsGel Preparation and Electrophoresis.of 2.2 M formaldehyde and 50% formamide).Electrophoresis is performed on an 11 ×14 cmHeat at 70oC for 10 minutes and quench on ice.horizontal gel. Prepare a 1% agarose gel inAdd 1.5 µl of Gel Loading Buffer and mix.10 mM Sodium Phosphate Buffer (pH 7.0) bymixing 0.5 g of agarose, 0.5 ml 1 M SodiumGel Preparation and Electrophoresis.Phosphate Buffer (pH 7.0), and 50 ml of H2O.Electrophoresis is performed on an 11 ×14 cmAfter dissolving the agarose, allow the solutionhorizontal submarine gel. Prepare a 1%to cool to 60oC, dissolve 0.1 g sodium iodoac-agarose gel in 1XMOPS/EDTABuffer by mixingetate, and pour the gel. Let sit at least one hour0.5 g of agarose, 5 ml of 10X MOPS/EDTAat room temperature. Load the samples andBuffer, and 36 ml of H2O. After dissolving theelectrophorese at 100 V for 15 minutes inagarose, allow the solution to cool to 60oC andElectrophoresis Buffer without buffer circulation.add 9 ml of 37% formaldehyde (final concentra-Then electrophorese at 100 V with constanttion is 2.2 M). Mix and pour the gel. Let sit atbuffer circulation for 2 hours or until theleast one hour at room temperature. Pre-elec-bromophenol blue dye had migrated 9 cm.trophorese the gel in Electrophoresis Buffer at60 V for 30 minutes. Load the samples and
Staining, Destaining, and Photography.Stain
F O C U S
( 1 9 9 7 )
V O L U M E
1 9
N U M B E R1
Gary F. GerardKatharine MillerMolecular BiologyResearch &Development
Bethesda ResearchLaboratories
17
热门文档