去耦合控制模型钢丝绳牵引的输送采摘机
Decoupling Control Model for Differential Cable-driven Picking Manipulator
Yong-gang Tang, Jun Shenand Hu Luo
Guilin Air-force Academy
Guilin, Chinatygor@163.com
Abstract—In this paper, the problem of coupling between pitch and roll in differential cable-driven picking manipulator is analyzed. A decoupling control model using quaternion method is proposed and validated by simulations and experiments.
Keywords-differential cable-driven manipulator;decoupling control;model;quaternion
I.INTRODUCTION
The fruit and vegetable picking robot isdeveloping quickly in recent years. Awell-designed picking manipulator iscritical tothis type of robot. The fruits to be handled are usuallyso delicatethata deft manipulator with high accuracy is essential. Moreover, simple structure and low cost are also expected to renderthe robot be readily accepted by farmers and be widely used in thefield[1-3].
The traditional manipulatoruseselectro motors, gears and joints for transmission. This structure adds excess loads to the manipulator, increasesmaintenance complexity, leads to highenergy consumption and moreproducing costs. To solve the problems,cable-driven transmissionis preferable. Cable drive is an elegantly simple technology that utilizes the averaging effect of many cables-each sharing the load wrapped around a drive capstan and an output shaft. It was originally invented as an inexpensive way to rotate large observatory telescopes accurately and smoothly. This technology is now widely used in many types of industrial, commercial, aerospace, military, medical and research applications, providing both cost and performance advantages.
Based on cable-driven transmission technology, we design a differential cable-driven manipulator for our fruit-picking robot, the structure of which is shownas

Fig.1
The arm of thismanipulator is driven by a differential cable-driven transmission,the structure of which is shown in detail in Fig.2. The arm is attached to the wheel in the middle (differential wheel), which is driven by two wheels on both sides through the cables wrapped around it. When two drive wheels turn at the same rate in the same direction (clockwise or anticlockwise), they impose moment on the differential wheel uniformly. As a result, the differential wheel will not spin around the roll axis (the axis of differential wheel), but turns around the pitch axis (the axis of drive wheel), driving the arm lift up or put down. When two drive wheels turn at the same rate in the opposite direction, they create equal-quantityand opposite-direction moment on the differential wheel, andthe differential wheel turns around the roll axis only, driving the arm roll[4]. This feature brings many advantages to the transmission, e.g., simple structure, large moment capacity and high accuracy.
Fig.2Structure of thedifferential cable-driven transmission
By changing rotating speed and direction of thetwo drive wheels, the arm can be controlled to move in both pitch direction and roll direction simultaneously. In other words, the arm is controlled by two drive wheels, i.e., the movement of the arm is affected by two inputs at the same time. Unfortunately, in practice the effect of two inputs is coupled, which handicaps the performance and the control accuracy. In this paper, the coupling between two inputs is analyzed, with the imbalance of drive wheel and mechanical errors under consideration. A decoupling controlled model is proposed and validated by simulation and experiments.
Fig.1Structure of the picking manipulator
___________________________________ 978-1-61284-748-1/11/$26.00 ©2011 IEEE
Both the simulation r esults and the online pro duction data are va lid and ensur e t he quality of the decoupling contro ller. Key words: wide ...
Both the simulation r esults and the online pro duction data are va lid and ensur e t he quality of the decoupling contro ller. Key words: wide ...
热门文档