沥青路面

Highway Engineering
Application of Viscoelastic Continuum Damage Model Based Finite Element
Analysis to Predict the Fatigue Performance of Asphalt Pavements
By Y. Richard Kim*, Cheolmin Baek**, B. Shane Underwood***, Vijay Subramanian****,
Murthy N. Guddati*****, and Kwangho Lee******
···························································································································································································································
Abstract
The Viscoelastic Continuum Damage (VECD) model has been implemented into a finite element package (FEP++) to predict thefatigue performance of asphalt concrete (AC) mixtures tested at the Federal Highway Administration Accelerated Load Facility(FHWA ALF) and the Korea Expressway Corporation (KEC) test road project sites. Both the VECD model and the FEP++ weredeveloped at North Carolina State University. The conceptual approach taken for this research is to separate the characteristics of thepavement system that are related to the material from those related to the boundary conditions. It is believed that this study is the firstapplication of an integrated structural/material mechanistic model for the fatigue performance prediction of AC pavements wheredamage in the asphalt layers is considered for the full time history and where the change in stiffness due to damage evolution iscaptured in the subsequent calculation of damage. The VECD model accounts for the viscoelastic nature of AC mixtures withgrowing damage, whereas the finite element model accounts for other important characteristics, such as temperature, layer thickness,stiffness gradient, etc. The controlled FHWA ALF experiment allows a direct comparison between observed and modeled fatigueperformance. Because the KEC test road experiment is subjected to real and variable traffic and environmental factors, the finiteelement simulation results are used to examine the effects of specific parameters in the pavement system on fatigue performance. Inthis regard, the model is found to effectively capture the effects of changes in layer thickness, layer material, and layer type. The needto develop transfer functions for true field performance prediction is also shown, and a simple example function is developed as proofof this concept.
Keywords: asphalt, viscoelasticity, continuum damage, constitutive model, finite element analysis, fatigue performance
···························································································································································································································
1. Introduction
Recent efforts in the United States towards developing a
mechanistic-empirical design methodology have resulted in an
increased interest in the full mechanistic modeling of asphalt
concrete (AC) pavements. Such interest stems from shortcomings
of existing empirical performance prediction methods that are
ineffective because actual conditions in the field differ from
those in the laboratory. This paper presents results from the
mechanistic modeling of AC pavements in terms of fatigue
performance. Of critical importance for such efforts is the
consideration of both the material and structural components and
their interaction in an AC pavement. To meet these criteria, the
viscoelastic continuum damage (VECD) model has been imple-
mented into a finite element software program (FEP++), developedat North Carolina State University, to predict the fatigueperformance of various AC mixtures in the field. This model isreferred to as the VECD-FEP++.Data from the Federal Highway Administration AcceleratedLoad Facility (FHWA ALF) and the Korea Expressway Corpora-tion (KEC) test road have been utilized to verify the predictionsfrom the VECD-FEP++. The goal of the current field studyusing the ALF is to assess the effects of various asphalt bindermodification techniques on mixture performance. To meet thisgoal, a series of pavements, each with similar performance-graded AC mixtures, has been tested until fatigue failure. Loadlevel, temperature, and pavement construction consistency arecarefully controlled in these experiments. The KEC test road wasconstructed in December 2002 to serve as the basis for Korea’snew pavement design guide, giving consideration to actual traffic
*Professor, Dept. of Civil, Construction, and Environmental Engineering, North Carolina State University, Raleigh, NC 27695-7908, USA (Corre-sponding Author, E-mail: kim@ncsu.edu)
**Graduate Research Assistant. Dept. of Civil, Construction, and Environmental Engineering, North Carolina State University, Raleigh, NC 27695-7908, USA***Graduate Research Assistant. Dept. of Civil, Construction, and Environmental Engineering, North Carolina State University, Raleigh, NC 27695-7908, USA****Graduate Research Assistant. Dept. of Civil, Construction, and Environmental Engineering, North Carolina State University, Raleigh, NC 27695-7908, USA*****Associate Professor, Dept. of Civil, Construction, and Environmental Engineering. North Carolina State University, Raleigh, NC 27695-7908, USA******Member, Director, Expressway and Transportation Research Institute, Korea Expressway Corporation, Gyeonggi-do 445-812, Korea (E-mail:
lkh@ex.co.kr)
Vol. 12, No. 2 / March 2008 109
Application of viscoelas... 1页 免费 A review... Finite element analysis of viscoelastic composite ...cticious and homogeneous continuum with averaged ...
Viscodamage Nonlinear viscoelasticity Viscoplasticity Finite element implementation 1...A viscoelastic continuum damage model and its application to uniaxial behavior...
Application of viscoelas... 1页 免费 Strength ...Key Words: Asphalt Mixture, Finite Elements, ... using a viscoelastic continuum damage model. ...
The interface damage evolution and it s effect ...A continuum model for void nucleation b y ...Formulation of im plicit finite element met hods ...
continuum anisotropic and viscoelastic behavior of ...(2002) Application of nonlinear viscoelastic models...(1998) Finite element implementation of anisotropic...
application in simulating the forming of complex ...is discretized by 3D 8-node continuum elements. ...Asymptotic homogenization of viscoelastic composites ...
Quadratic Finite Elements Johannes Mezger and ...Finally, an application to virtual tissue ...(1) The elastic force of a viscoelastic material...
continuum damage model parameters to micro ...APPLICATION TO HIGH PURITY COPPER: RESULTS AND ...[7]. performed finite element simulation using ...
continuum damage model parameters to micro ...APPLICATION TO HIGH PURITY COPPER: RESULTS AND ...[7]. performed finite element simulation using ...
热门文档