文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > Design and fabrication of narrow band radar absorbing materials at terahertz frequencies
侵权投诉

Design and fabrication of narrow band radar absorbing materials at terahertz frequencies

The technique of tailoring the complex refractive index of an artificial dielectric material has been developed at the University of Lowell Research Foundation (ULRF). Low reflection coatings, generally referred to as D?llenbach layers, have been designed

Design and fabrication of narrow band radar absorbing materials at terahertz frequencies

R.H. Giles, A.J. Gatesman, A.P. Ferdinand and J. Waldman

University of Lowell Research Foundation

Lowell, Massachusetts 01854

ABSTRACT

The technique of tailoring the complex refractive index of an artificial dielectric material has been developed at theUniversity of Lowell Research Foundation (ULRF). Low reflection coatings, generally referred to as Dällenbach layers, havebeen designed for metal substrates using the artificial dielectric. The method of characterizing materials for the purpose oftailoring their dielectric properties at terahertz frequencies will be discussed. Results will be shown for a typical dielectriccoated aluminum plate specifically designed for low reflection behavior at ≈ 0.6 terahertz.

2. INTRODUCTION

Design of optical and quasi-optical measurement systems operating at terahertz frequencies require a wide range ofmaterials for component fabrication. Critical to implementation of these laboratory systems are far-infrared radiationabsorbing material (FIRAM) which may be used to suppress unwanted stray radiation. One type of FIRAM, known atmicrowave frequencies as the Dällenbach layer, consists of a metal substrate coated with an evenly thick homogeneous lossydielectric material.[1] See figure 1.

Realization of the Dällenbach layer as FIRAM starts with ULRF's development of a particular class ofsubmillimeter wavelength artificial dielectric, generically referred to as metallic paints. The paint, manufactured by StainlessSteel Coatings, Inc. of Littleton, Mass, consists of resins such as vinyl acetate, silicone or polyurethane uniformly loadedwith stainless steel flakes. Since the metal flakes are dimensionally small compared to the wavelength, the paint exhibitsoptical properties of a homogeneous media which depend on the concentration of stainless steel flake.

Measurements were performed on a series of vinyl acetate based paint samples, each with a different concentration ofstainless steel flake. The material's complex refractive index, n – i k, was shown to be well behaved as a function of themetal flake loading ratio, ρ. An algorithm was developed to describe the behavior analytically and expressed as:

n ≈0.0201 ρandk ≈0.0504 ρ(1)

for a loading ratio in the regime of 0 ≤ ρ ≤ 30 grams of stainless steel flake per liter of vinyl acetate binder.

The technique of characterizing and tailoring the dielectric constant of metal loaded paints at terahertz frequencies hadbeen previously demonstrated at ULRF.[2] When tied to theoretical modeling of the paint's reflectivity as a function ofthickness, dielectric constant and frequency using the Fresnel equations, anechoic coatings can be designed to provide morethan –25dB of radar cross section (RCS) reduction at any frequency in the terahertz regime.

artificial dielectric layer

metal substrateλ}

Design and fabrication of narrow band radar absorbing materials at terahertz frequencies

t = /4n

Figure 1. The FIRAM depicted is a resonant absorption structure which consists of a quarter wavelength thick homogeneouslossy dielectric surface on a metal plate.

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email