附录 A MCB – Industrial Robot Feature Article The BarrettHand grasper – programmable flexible part handling and assembly Abstract This paper details the design and operation of the BarrettHand BH8-250, an intelligent, highly flexible eight-axis gripper that reconfigures itself in real time to conform securely to a wide variety of part shapes without tool-change interruptions. The grasper brings enormous value to factory automation because it: reduces the required number and size of robotic work cells (which average US$90,000 each – not including the high cost of footprint) while boosting factory throughput; consolidates the hodgepodge proliferation of customized gripper-jaw shapes onto a common programmable platform; and enables incremental process improvement and accommodates frequent new-product introductions, capabilities deployed instantly via software across international networks of factories. Introduction This paper introduces a new approach to material handling, part sorting, and component assembly called “grasping”, in which a single reconfigurable grasper with embedded intelligence replaces an entire bank of unique, fixed-shape grippers and tool changers. To appreciate the motivations that guided the design of Barrett’s grasper, we must explore what is wrong with robotics today, the enormous potential for robotics in the future, and the dead-end legacy of gripper solutions. For the benefits of a robotic solution to be realized, programmable flexibility is required along the entire length of the robot, from its base, all the way to the target work piece. A robot arm enables programmable flexibility from the base only up to the tool plate, a few centimeters short of the target work piece. But these last few centimeters of a robot must adapt to the complexities of securing a new object on each robot cycle, capabilities where embedded intelligence and software excel. Like the weakest link in a serial chain, an inflexible gripper limits the productivity of the entire robot work cell. Grippers have individually-customized, but fixed jaw shapes. The trial-and-error customization process is design intensive, generally drives cost and schedule, and is difficult to scope in advance. In general, each anticipated variation in shape, orientation, and robot approach angle requires another custom-but-fixed gripper, a place to store the additional gripper, and a mechanism to exchange grippers. An unanticipated variation or incremental
Bidic, and Yoky Matsuoka (王亮、赵亚州翻译校核,...同 时工业应用的机械手被设计用于处理特定的部分。 ...手[55] ,巴雷特手[65] ,南安普敦 手[43] ,...
热门文档