Topology Optimization in Automotive
Brake Pedal Redesign
Mohd Nizam Sudin*,1,2, Musthafah Mohd Tahir2, Faiz Redza Ramli1, Shamsul Anuar Shamsuddin1 1Innovative Machine and Mechanism Research Group (INNOMA), 2Green Technology Vehicles Research
Group (GTeV) Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM)
Hang Tuah Jaya, 76100 Durian Tunggal
Melaka, Malaysia
nizamsudin@utem.edu.my
Abstract— Nowadays, automotive industry is continuing to strive for light weight vehicle in improving fuel efficiency and emissions reduction. To produce a better performance car it is important to design vehicles with optimum weight. In order to reduce the weight of vehicle without sacrificing its integrity, this project aims to employ topology optimization technique to propose an optimal design of an automotive component in early phase of product development. In this project the material used for an existing brake pedal is unchanged as this study focuses on reducing weight of existing brake pedal without material substitution. The digital model of an existing brake pedal was generated using CATIA V5 solid modelling software. Topology optimization was performed by using Altair Optistruct software under linear static stress analysis. Finally, a new light weight design brake pedal is proposed. The result of the study shows that the weight of a new designed brake pedal was 22% less as compared to an existing brake pedal without sacrificing its performance requirement.
Keyword- Brake pedal, Redesign, Topology optimization, Weight reduction
I. INTRODUCTION
Nowadays, automotive industry is growing exponentially towards light weight vehicle, cost effective vehicle components and environmental friendly. Vehicle weight reduction is one of the promising strategies to improve fuel consumption. By reducing vehicle mass, the inertial forces that the engine has to overcome when accelerating is less, and the work or energy required to move the vehicle is decreased. In general, for every 10% reduction in vehicle weight, the fuel consumption of vehicles is reduced by 5-7% [1]. There are three common approaches to minimize vehicle weight in practice that are; substitution with light weight material, downsizing of the vehicle and removing unwanted material from the structural component. Traditionally, brake pedal is designed by iterative methods and optimized under non-optimal topology in static load conditions. This approach requires various iterations and the final design is arrived through via trial and error approach. This iterations process is time-consuming therefore increased cost. In addition the output of this approach does not necessarily represent the best design solution. Thus a systematic approach to reach optimal design solution in the conceptual design stage is vital and it can be realized with the application of topology optimization. This paper presents the application of topology optimization to redesign brake pedal of passenger car aims to for weight reduction. The approach has twofold; accelerate the process and achieve the optimal design solution.
II. LITERATURE REVIEW ON THE APPLICATION OF TOPOLOGY OPTIMIZATION
An important aspect in automotive industry is to achieve better design concepts by considering structure performance and manufacturing cost in the early stages of product development. Topology optimization is a mathematical approach that optimizes material layout within a given design space, for a given set of loads and boundary conditions such that the resulting layout meets a prescribed set of performance target or predetermined design goal. It provides an initial design concept for downstream applications, which leads to achieving better design by using computer-aided techniques. Yildiz et al. [2] employed topology optimization approach for optimal design of engine mount bracket under dynamic loading conditions. The research aims to create an initial design concept, which has optimal structural layout. The effectiveness and verification of proposed approach were demonstrated with experimental results. Cavazzuti et al. [3] have solved the problem of automotive chassis design in view of weight reduction by means of topology optimization. They found that the methodology has been proven to be successful in finding innovative and efficient layouts for automotive chassis. Kaya et al. [4] completely redesigned a failed clutch fork using topology and shape optimization approach. A new design proposal was determined with the topology optimization approach and response surface methodology was used to improve the design of clutch fork. The improved design of clutch fork was obvious as the mass reduction was 24% and maximum stress reduction was 9%. In addition the rigidity was improved up to 37% in comparison to the original clutch fork.
热门文档