Available online a
Scholars Research Library
Der Pharmacia Lettre, 2011, 3 (6): 232-239
(doc.guandang.net)
ISSN 0975-5071 USA CODEN: DPLEB4
Analytical Methods for Cleaning Validation
Zahid Zaheer* and Rana Zainuddin
Department of Quality Assurance, Y. B. Chavan College of Phamacy, Dr. Rafiq Zakaria
Campus, Rauza Bagh, Aurangabad, India
______________________________________________________________________________
ABSTRACT
Residue identification in a pharmaceutical manufacturing environment involves; the cleaner, primary ingredients, excipients, decomposition products, and preservatives. This document is intended to help with the cleaner residue identification. Residue detection method selection for cleaners can involve specific methods for specific cleaner ingredients such as; high performance liquid chromatography (HPLC), ion selective electrodes, flame photometry, derivative UV spectroscopy, enzymatic detection and titration, or it can involve non-specific methods that detect the presence of a blend of ingredients such as: total organic carbon, pH, and conductivity. The FDA prefers specific methods, but will accept non-specific methods with adequate rationales for their use. For investigations of failures or action levels, a specific method is usually preferable.
______________________________________________________________________________
INTRODUCTION
There are a variety of analytical methods that can be chosen to measure target residues. This article will cover analyhcal methods for chemical residues. The selection of an analytical method for measuring residues is closely related to the chemical nature of target residues and to the analytical limits established for those residues. Chemical nature includes whether the target residue is organic or inorganic, is soluble in water or other solvents, its degree of polarity, and its stability in the cleaning environment. A key element in the selection of an appropriate analytical method is that the method produces a result that has a logical, scientific link with the target residue [l, 2,3] . For example, if the target residue is an organic, nonionized drug active (XYZ), and the acceptance criterion is 2 ppm in the analyzed sample, then using conductivity as an analytical tool would be inappropriate because there is no scientific relationship between the presence of the target residue in the analytical sample and the measurement of conductivity in the test sample. A high performance liquid chromatography (HPLC) method, which was
232


Validation of Analytical Methods Used in Cleaning Validation_中医中药_医药卫生_专业资料。今日推荐 四季养生 中医养生与保健 中医养生知识大全 女人养生之道67份...
Why?Some?Regulatory?Analytical?Methods?Should?be?Replaced? Introduction:? ...The?use?of?LC?for?the?analysis?of?cleaning?validation/verification?samples?...
Cleaning Process Development and Validation_药学_医药卫生_专业资料。June 16,...Analytical methods and their sensitivity Equipment Design/Construction for ...
PDA publishes new TP on cleaning validation_临床医学_医药卫生_专业资料。...for Visual Inspection) and 7 (Analytical Methods) for a quantitative ...
Establish methodology for validation of MODR upon site transfer – Define review criteria for evaluation of QbD based analytical methods 16 FDA-EMA ...
(化学的和微生物的) Identify analytical test methods and ensure LOD / LOQ ...Include the requirement for ―visibly clean‖ in all cleaning validation ...
Consider the preparation of a VMP for Cleaning Validation 依照验证主计划...(化学的和微生物的) Identify analytical test methods and ensure LOD/LOQ is...
An overview on cleaning validation of API manufacturing plants_能源/化工_...development of sampling and analytical methods for recovery and detection ...
The requirements for ‘Testing for Impurities’ are typically employed for the validation of analytical methods specific to cleaning validation. 在清洁验证专用...
Validation of Analytical Equipment and Analytical Methods 分析设备与分析方法的...Validation Approach 清洁验证 Cleaning Validation 维护系统的验证状态 Maintaining ...
热门文档