文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > EXPERIMENTAL AND NUMERICAL ANALYSIS
侵权投诉

EXPERIMENTAL AND NUMERICAL ANALYSIS

This study, carried out within the frame of the

EXPERIMENTAL AND NUMERICAL ANALYSIS

OF A HYBRID-VENTILATED ROOM

F.CRON, M. EL MANKIBI, C.INARD, P.MICHEL

1 : LEPTAB, University of La Rochelle, Avenue Michel Crépeau, F-17042 La Rochelle Cedex 01Phone :+33.(0)5.46.45.86.24., Fax : +33.(0)5.46.45.82.41, , 2 : LASH, ENTPE, Rue Maurice Audin, F-69518 Vaulx-en-Velin

Phone :+33.(0)4.72.04.70.31., Fax : +33.(0)4.72.04.70.41, , (1)

(2)

(1)

(2)

Summary

This study, carried out within the frame of theIEA Annex 35 “ Hybrid Ventilation in New andRetrofitted Buildings”, was undertaken to modela hybrid-ventilated room, and to implementcontrol strategies.

An experimental cell, called HYBCELL, wasdesigned at the ENTPE-LASH Laboratory toprovide both mechanical and natural ventilation.Various sensors were installed in the cell for theindoor environment, in the hall, and outside forthe boundary conditions.

Modeling was performed by ENTPE-LASH andLEPTAB. The collaboration, supported by theADEME (Agence De l’Environnement et de laMaîtrise de l’Energie), resulted in models thatdescribe the cell, its mass and thermal transfersto make a comparative study between severalventilation systems and controls.

Introduction

The purpose of a hybrid ventilation system is touse both natural and mechanical driving forcesto provide a good and healthy indoor

environment at the lowest cost. Although therewere projects on natural ventilation like AIOLOS(Allard, 1998) or NatVent (NatVent, 1999), thereremains a lack of knowledge concerning theimplementation of hybrid ventilation systems,the use of such technologies and their suitablecontrol strategies. For these reasons, the IEAdecided to develop the Annex 35 “HybridVentilation in New and Retrofitted buildings”(Annex 35, 2000). This study is part of thisAnnex and consists in applying control

strategies to hybrid ventilation systems in officebuildings or schools. Both experimental andmodeling approaches were used for thispurpose.

Description of the experimental roomLocation and architecture of HYBCELLThe ENTPE-LASH experimental room is

located in Lyon (France) and is on the first levelof a two-storey building. The only external wall

is a Northern-Eastern facade that makes a 70°angle with the horizontal plane. The cell issurrounded by a heated cell and hall.

The cell was retrofitted to be comparable to anoffice, so a false ceiling and a access floor wereinstalled to reduce the height. HYBCELL is2.95 m high, 3.5 m wide and 5.1 m long.

There are six windows placed symmetrically on

EXPERIMENTAL AND NUMERICAL ANALYSIS

the facade as illustrated on figure 1.

Figure 1: Architecture of HYBCELL

Material used for HYBCELL

The external wall has a light thermal capacity: itconsists of two layers of wood filled with somepolystyrene. The partitions are made of two thinsteel layers filled with rock wool. The floor is awooden one and some plaster board with rockwool composes the ceiling. So the globalthermal capacity of HYBCELL is quite light.

The windows are double pane ones. The shadeon the facade (windows and wall) was

calculated to estimate the incident direct anddiffuse radiation loads.

Experimental devices

The room has been equipped with air

temperature, dry bulb temperature and CO2sensors to collect information on indoor airquality and comfort parameters. Parameterslike wind speed, wind direction, and diffuse anddirect solar radiation were required too. TheENTPE meteorological station provided us withthese boundary conditions. The windows wereequipped with a driving system, composed bystep by step motors. This device can controlwindow openings accurately and automatically,

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email