Power generation with ORC machines using low-grade waste heat or
renewable energy
Vasile Minea
ABSTRACT
By 2030, global energy consumption is projected to grow by 71%. At the same time, energy-related carbon dioxide emissions are expected to rise by more than 40%. In this context, waste and renewable energy sources may represent alternatives to help reduce fossil primary energy consumption. This paper focuses on the technical feasibility, efficiency and reliability of a heat-to-electricity conversion, laboratory beta-prototype, 50 kW Organic Rankine Cycle (ORC) machine using industrial waste or renewable energy sources at temperatures varying between 85 ℃ and 116 ℃. The thermodynamic cycle along with the selected working fluid, components and control strategy, as well as the main experimental results, are presented. The study shows that the power generated and the overall net conversion efficiency rate of the machine mainly depends on such parameters as the inlet temperatures of the waste (or
renewable) heat and cooling fluid, as well as on the control strategy and amount of parasitic electrical power required. It also indicates that after more than 3000 h of continuous operation, the ORC-50 beta-prototype machine has shown itself to be reliable and robust, and ready for industrial market deployment.
1. Introduction In Canada, eight major manufacturing sectors account for over 91% of the energy input to the manufacturing industries and about 71% of the input energy is released to the environment via four classes of identifiable waste heat streams at relatively low temperatures (i.e. up to 370 °C) in the form of stack gases, vapour or liquid effluents . Such energy rejections along with power generation from fossil fuel combustion lead to global warming and ambient air pollution. Generally, heat recovery below 370 °C is not economically feasible for producing electricity with conventional steam-based power generation cycles such as Diesel, Stirling, or basic Clausius–Rankine. The last of these, for example, converts heat into work at higher temperatures by using water as a
2.已完成ORC低温余热发电工质的热物性及传热特性的研究 已完成ORC低温余热发电工质的热物性及传热特性的研究 ORC ORC循环工质物性及传热特性试验装置 ORC循环工质物性...
?有机朗肯循环余热发电技术 (ORC) 中低温烟气 有机透 平 凝汽器 有机工质 余热锅炉 ~ 发电机 冷却塔 加压泵 储液 罐 冷却泵 烟气余热有机朗肯循环(ORC)...
低温有机朗肯循环ORC发电系统优化研究(硕士论文)_...ABSTRACTWiththerapidlydevelopmentofeconomy,energy...Itachieve powergeneration.Asoflower resultoflowboiling ...
应用:废热发电废热:热水 Evaporator Pump Expander Generator Condenser Power Out 向环境放热 为节约中国做贡献! 2、开山ORC螺杆膨胀机主机 ? 单级开启式ORC螺杆...
It can be concluded that power generation with ORC using renewable heat sources like solar or geothermal systems and low-temperature industrial waste heat ...
Working principle of Organic Rankine cycle (ORC) ...in replacement of diesel power generation (cost ...machines Volumetric expanders Turbomachines Scroll ...
Main advantage of ORC : Efficient conversion of low temperature heat source ...with low-cost biomass in replacement of diesel power generation (cost of ...
Power generation from medium temperature geothermal...6. Conclusion The designing of an ORC-Binary ...Geothermal power plant with Kalina cycle. ...
profile rotors lubricated with dissolved oil in the working fluid ORC ...machines to the compressed air, refrigeration and power generation industries”...
基于ORC余热发电系统的管道设计要求和选材_专业资料。先简要介绍了有机朗肯循环(ORC)的原理及系统组成以及国外已经应用的有机工质的相关特点,然后在常规的管路设计...
热门文档